28/45
Mounting, demounting and electric installation
10.7 Mounting cut-out
①
Mounting cut-out
Fig. 10-13: Mounting cut-out
Display size
15"
Tab. 10-3: Mounting cut-out in millimeters
Ensure the IP protection class:
Observe the tolerance specifications for the mounting cut-out!
●
Observe the wall thickness for the mounting cut-out! Minimum of
●
2 mm and maximum of 6 mm.
Consider the weight of the display and of the PC. Especially if
●
there is a strong vibration. Reinforce the front plate with slates at
the internal side close of the mounting cut-out if required.
Bosch Rexroth AG R911384706_Edition 01
PR30 and VR30 Control Cabinet PC and
1
Width ①
412.40
Tolerance ±0.7
Panel PC
Height ②
261.70
Tolerance ±0.4