Telephone Monitor Mode Zone Leds - Bosch Solution 880 CC408 Quick Reference Manual

CC408 | Quick Reference Guide | 2.
2.1.3 STAY Mode 2
Press and hold the [0] key until two beeps sound.
2.1.4 Arm All Areas in AWAY Mode
This function allows a code to simultaneously arm,
in AWAY Mode, all areas to which the code is
assigned. This function eliminates the need to arm
each area individually.
Enter your code followed by the [0] and [#] keys
(for example, [2 5 8 0 0 #]).
2.2 Disarming the System (Off)
2.2.1 AWAY Mode
Enter your code followed by the [#] key
(for example, [2 5 8 0 #]).
2.2.2 STAY Mode 1
1. Press and hold the [*] key until two beeps
sound (only if no alarm).
Or
2. Enter your code followed by the [#] key
(for example, [2 5 8 0 #]).
2.2.3 STAY Mode 2
1. Press and hold the 0 key until two beeps
sound (only if no alarm).
Or
2. Enter your code followed by the [#] key
(for example, [2 5 8 0 #]).
2.2.4 Disarm All Areas
This function allows a code to simultaneously
disarm, in AWAY Mode, all areas to which the
code is assigned. This function eliminates the need
to disarm each area individually.
Enter your code followed by the [0] and [#] keys
(for example, [2 5 8 0 0 #]).
2.3 Isolating Zones
2.3.1 Standard Isolating
1. Press the [*] key twice.
2. Enter the zone number to isolate followed by
the [*] key.
Repeat Step 2 if more than one zone must be
isolated.
3. Press the [#] key to exit when finished.
2.3.2 Code to Isolate
1. Press the [*] key once.
2. Enter your user code.
3. Enter the zone number to isolate followed by
the [*] key.
Repeat Step 2 if more than one zone must be
isolated.
4. Press the [#] key to exit when finished.
Bosch Security Systems | 6/04 | 4998152468B
Installer's Programming Commands
2.4
1. Enter the Installer Code followed by the [1]
2. Enter the number of days (0 to 15) to wait
2.5
Enter the Installer Code followed by the [8] and
[#] keys (for example, [1 2 3 4 8 #]).
2.6
1. Enter the Installer Code or Master Code
2. Test each zone.
3. Press the [#] key to exit.
2.7
Enter the Installer Code followed by the [5] and
[#] keys (for example, [1 2 3 4 5 #]).
2.8
1. Enter the Installer Code followed by the [6]
2. To send a Test Report, press and hold the [9]
3. When complete, repeat Step 1 to toggle
Table 5: Telephone Monitor Mode Zone
Zone LED
1
2
3
4
5
None
Set First Test Report
and [#] keys (for example, [1 2 3 4 1 #]).
until the first Test Report, followed by the [#]
key.
Event Memory Recall
The last 40 events (non-partitioned) or
last ten events (partitioned) display in
reverse order (that is, most recent to
least recent).
Walk Test Mode
followed by the [7] and [#] keys (for example,
[1 2 3 4 7 #]).
Satellite Siren Service Mode
Telephone Monitor Mode (Toggle
On/Off)
and [#] keys (for example, [1 2 3 4 6 #]).
key until two beeps sound.
Telephone Monitor Mode off.
LEDs
Dialling Event
Telephone line seized
Dialling telephone number
Handshake received
Data being sent
Kiss-off received
Released telephone line
EN | 7