Set Stay Mode 2 Zones; Report Monitor Mode (Toggle On/Off); Walk Test Mode; Event Memory Recall - Bosch ICP-SOL2-P Quick Reference Manual

Control Panel
3.7

Set STAY Mode 2 Zones

1.
2.
3.
3.8

Report Monitor Mode (Toggle On/Off)

1.
2.
Zone Indicator
1
2
3
4
5
None
Table 3.2: Report Monitor Mode
Notice!
You must exit from Report Monitor Mode to resume normal operations.
3.9

Walk Test Mode

1.
2.
3.
3.10

Event Memory Recall

Enter the Installer Code or Master Code, followed by [8] and the [#] key.
The last 256 events are displayed in reverse order (for example, most recent to least recent).
Bosch Security Systems, Inc.
Enter the Installer Code or Master Code, followed by [4] and the [#] key.
Enter the Zone Number you want the system to automatically isolate, followed by the [*]
key. Repeat if more than one zone must be automatically isolated when armed in STAY
Mode 2.
Press the [#] key to exit.
Enter the Installer Code, followed by [6] and the [#] key.
Press and hold the [9] key until two beeps are heard to send a test report.
Dialing Event
Telephone Line Seized
Dialing Telephone Number / Network Connect
Handshake Received
Data Being Sent
Kiss-Off Received
Released Telephone Line / Idle
Enter the Installer Code or Master Code, followed by [7] and the [#] key.
Test each zone as required.
Press the [#] key to exit.
Quick Reference Guide
Operating Commands | en
2014.06 | 02 | F01U298027
15