Arming In Stay Mode - Bosch AMAX panel 2100 User Manual

18 en | Arming and Disarming the System
Please contact your installer to enable/disable this function.
RADION RF Keyfob Arming
Users can use a RADION RF keyfob to arm the system.
4
P
Please contact your installer to enable/disable this function.
3.1.2

Arming in STAY Mode

The STAY Mode is used to arm the perimeter and unused areas
of the premises to detect a would-be intruder, while at the same
time being able to move freely within an area that is
automatically isolated.
Keypad Arming
There are two methods to arm your system in STAY mode.
Method 1:
4
P
P
Method 2 (Quick Arm):
4
P
Please contact your installer to enable/disable this function.
Master Keypad Arming
With a master keypad, either all areas or a single area can be
armed in AWAY mode.
2015.05 | 04 | F.01U.295.569
Press the arming button of the RADION RF keyfob.
The AWAY indicator flashes slowly and exit time starts.
After exit time, the AWAY indicator is lit.
Enter your code and press [*].
The system beeps twice, the STAY indicator flashes slowly
and exit time starts. After the exit time, the STAY indicator
is lit.
The lights corresponding to all zones programmed as
automatically isolated zones (Interior Instant Zone) begin to
flash and continue until the exit time is finished.
Press and hold [*] until the system beeps twice.
The STAY indicator flashes slowly and exit time starts. After
the exit time, the STAY indicator is lit.
Bosch Sicherheitsysteme GmbH
AMAX panel