Advertisement
Flush Mounting on a Small Pole: 1 PSU + 1 Lithium Battery as an Example (Pole Diameter: 60–114 mm)
4.4
Required Accessories
Pole mounting kit
C x 1
B x 1
A x 1
Attachment
kit x 2
Connecting plate x 1
Install the lithium battery to
the pole.
4.5
Flush Mounting on a Large Pole: 2 PSUs + 1 Lithium Battery as an Example (Pole Diameter: 114–400 mm)
Required Accessories
Large pole
installation
kit x 2 sets
Pole mounting kit
B x 2 C x 0
A x 2
Connecting
Attachment
kit x 1
kit x 1
Hanging
kit x 1
Connecting plate x 1
Install the attachment kit and hanging kit
on lithium battery right side.
Installation Procedure
Install the pole mounting
kits.
Install the PSU to the
lithium battery.
Installation Procedure
Assemble the large pole
installation kits.
Front
Install the PSUs to
the upper layer of the
large pole.
Install the attachment
Install the attachment kit and
kit on lithium battery
connecting kit to the lithium battery.
right side.
Install the connecting plate.
Secure the large pole installation
kits to the large pole.
(Unit: mm)
Rear
Ensure that the hoops
are attached closely to
the pole so that they
do not slide.
Install the connecting
plate.
4
Assemble the PSUs and
install the PSU hanging kit.
Install the lithium battery to the
lower layer of the large pole.
If a sunshade is configured,
install the sunshade on the
lithium battery.
Advertisement
