Using The Glued Surface Mounting Adapter - Kenwood KCA-HX5M Instruction Manual

Helmet
Installation
Using the
Glued Surface
Mounting
Adapter
Switching the
Microphone
Earbuds
External Mesh
Intercom
Antenna
KCA-HX5M EN
2. INSTALLING THE
HEADSET ON
YOUR HELMET
2.2 Using the Glued Surface Mounting
Adapter
If you have any problem equipping the clamp unit
on the helmet for any reason, you may use the glued
surface mounting adapter to attach the clamp unit on
the external surface of the helmet.
1. Remove the speaker unit.
1
2
2. Remove the back plate.
3. Remove the rubber pad and replace it with the
thicker rubber pad included in the package.
4. Hook on the adapter to the clamp unit then screw in
the glued external adapter to the clamp unit.
Motorcycle Bluetooth Communication System | 14
MENU