Helmet
Installation
Using the
Glued Surface
Mounting
Adapter
Switching the
Microphone
Earbuds
External Mesh
Intercom
Antenna
KCA-HX5M
EN
2. INSTALLING THE
HEADSET ON
YOUR HELMET
5. Reconnect the speaker cable to the speaker port.
6. Locate a proper surface on the helmet to attach the
unit then clean the helmet surface location with a
moistened towel and allow to dry thoroughly.
7. Peel off the cover of the adhesive tape of the adapter
and attach the unit on the proper surface of your
helmet.
# Caution
• KENWOOD recommends using the clamp unit.
The glued surface mounting adapter is provided
for convenience, but is not the recommended
mounting method. KENWOOD is not responsible for
its use.
2
1
Motorcycle Bluetooth Communication System | 15
MENU