Panasonic PM4H-F Series Quick Manual page 8

PM4H-F
UL File No.: E122222
CSA File No.: LR39291
48
1.890
48
1.890
CHARACTERISTICS
Item
Rated operating voltage
Rated frequency
Rated power consumption
Rating
Output rating
Operation mode
Time range
Operation time fluctuation
Setting error
Time
accuracy *1
Voltage error
Temperature error
Contact arrangement
Contact Contact resistance (Initial value)
Contact material
Mechanical (contact)
Life
Electrical (contact)
Allowable operating voltage range
Insulation resistance (Initial value)
Electrical
Breakdown voltage (Initial value)
function
Min. power supply width
Min. reset time
Max. temperature rise
Shock resistance
Mechanical
function
Vibration resistance
Ambient temperature
Ambient humidity
Operating
condition Atmospheric pressure
Ripple factor (DC type)
Protective construction
Others
Weight
*Notes: 1) Unless otherwise specified, the measurement conditions at the maximum scale time standard are specified to be the rated operating voltage (within 5% ripple
factor for DC), 20°C 68°F
2) For the 1s range, the tolerance for each specification becomes ±10ms. When the power goes on, in rush current (0.3A) flows. Cautions should be taken. The
minimum power supplying time after forced reset input is 2s or more.
3) Between contacts of different pools for F8, F11R types only.
DIN48 SIZE ANALOG
MULTIRANGE POWER
OFF-DELAY TIMERS
FEATURES
• Switch operation times between three types of time ranges of 1 s to 10 s and 1
min to 10 min.
• Instantaneous reset available.
• The shorter body makes it easier to use.
mm inch
62.5
2.461
Type
PM4H-F8
Power OFF-delay
Timed-out 2 Form C
Functional
Destructive
Functional
Destructive
ambient temperature.
100 to 120V AC, 200 to 240V AC, 24V AC, 24V DC, 12V DC
50/60Hz common (AC operating type)
Approx. 5VA (AC type)
Approx. 2W (DC type)
3A 250V AC (resistive load)
1s to 10s: 3 range switchable 1 min to 10 min: 3 range selectable
±5% (Full-scale value)
±0.5% (at the operating voltage changes between 85 to 110%)
±2% (at 20°C ambient temp. at the range of –10 to +50°C
Timed-out 1 Form C
Max. 100mΩ (at 1A 6V DC)
Au flash on Silver alloy
5
10 (at rated control capacity)
85 to 110% of rated operating voltage (at 20°C coil temp.), 90 to 110% (DC Type)
Between live and dead metal parts
Between input and output
Min. 100MΩ
Between contacts of different poles *3
Between contacts of same pole
1,500Vrms for 1 min Between live and dead metal parts
1,500Vrms for 1 min Between input and output
1,000Vrms for 1 min Between contacts of different poles *3
750Vrms for 1 min Between contacts of same pole
s range type: 100ms
min range type: 2s
55°C
Min. 98m/s
Min. 980m/s
10 to 55Hz: 1 cycle/min double amplitude of 0.5mm (10min on 3 axes)
10 to 55Hz: 1 cycle/min double amplitude of 0.75mm (1hr on 3 axes)
–10 to +50°C
Max. 85%RH
860 to 1,060hPa
IP65 on front panel (using rubber gasket ATC18002) <only for IP65 type>
100g 3.527 oz
110g 3.880 oz
02/2003
PM4H-F
PM4H-F8R
Power OFF-delay (with reset)
±0.3%
+14 to +122°F)
Timed-out 2 Form C
7
10
(At 500V DC)
50ms
131°F
2
(4 times on 3 axes)
2
(5 times on 3 axes)
+14 to +122°F
20%
(Pin type)
(Screw terminal type)
PM4H-F11R
19