Piston Ring End Gap
Standard
0.0078 - 0.0157"
(0.2-0.4 mm)
Use the piston to position the rings squarely 1" down from the
top of the cylinder.
NOTE: If this measurement is out of specification, complete engine replacement is required.
The only internal parts available for this engine are gaskets and seals.
Connecting Rod Small End ID
Standard
0.5125"
(13.02 mm)
NOTE: If this measurement is out of specification, complete engine replacement
is required. The only internal parts available for this engine are gaskets and
seals.
Connecting Rod Big End ID
Standard
1.0244"
(26.02 mm)
NOTE: If this measurement is out of specification, complete engine replacement is required.
The only internal parts available for this engine are gaskets and seals.
Service Limit
0.0393"
(1.0 mm)
Service Limit
0.5145"
(13.07 mm)
Service Limit
1.0263"
(26.07 mm)
34