Diagnoses
6–6
6.5
Separate window for cyclic display
The DSS can display any parameters dynamically in separate windows. In
addition to a pure text format, you may also choose a progress bar for dis-
play.
L
Select the menu sequence:
D DIAGNOSES " WATCH IDN, or
D click on the
select "Watch IDN".
Display as value ...
Result
L
Enter the parameter to be displayed in the "Ident no." field.
L
Select "Value" or "Progress bar" as View type, and the desired upper and
lower limits for the "Progress bar" option.
L
Clicking on "OK" will close the DSS dialog and display the parameter cycli-
cally in a separate window.
The data display is updated in the intervals set for the "Module status dis-
play" (cf. page 6–3).
.
Parameter values (e.g. setpoints and/or actual values) can also be out-
put via max. 4 analog outputs (cf. section 4.2.12).
Thus, it is possible to visualize the drive responses, e.g., using a stor-
age oscilloscope.
command button in the DSS basic image and then
Display as value and as
progress bar ...
Result
1070 066 037-101 (00.02) GB