Accessories; Prior To Assembly - Bosch Rexroth DB 5X E Series Operating Instructions Manual

Mating connectors
Valve mounting screws

7.5 Accessories

For connection of the control line to safety valves of type DBW, mating connectors
according to EN 175301-803, optionally with and without circuitry, are available. For
more details, refer to "Data sheet 08006".
Table 7: Mating connectors for valves type DBW...5X/...E
Color
without circuitry
gray R901017010
black R901017011
Table 8: Valve mounting screws for subplate mounting
Valve type + size
DB(W)10...5X/...E
DB(W)20...5X/...E
DB(W)30...5X/...E
For more details on the valve mounting screws, refer to chapter 7.7 "Assembly of
valves for subplate mounting".

7.6 Prior to assembly

Faulty assembly of valve mounting screws!
Improperly mounted valve mounting screws may become loose during subsequent
operation and fly around due to the pressure and thus cause serious injuries.
Only pressurize your system after all valve mounting screws have been
f
completely and properly mounted according to the specifications.
Leaking hydraulic fluid!
Hydraulic fluid may leak during assembly and disassembly of safety valves.
Consequently, persons may slip or fall.
Immediately remove hydraulic fluid that has leaked out.
f
Sharp edges!
Safety valves may have sharp edges at the valve openings. During transport or
assembly/disassembly, cutting or abrasive injuries may result.
Wear corresponding protective clothing during transport.
f
Do not reach into valve openings!
f
Material number
with indicator light with rectifier
12...240 V 12...240 V
-
R901017022 R901017025
Dimensions
M12 x 50
M16 x 50
M18 x 50
WARNING
CAUTION
RE25802-B/09.19, DB(W)...5X/...E, Bosch Rexroth AG
Assembly 25/56
with indicator light
and Zener diode
suppression circuit
24 V
- -
R901017026
Material number
R913015611
R913015664
R913015903