Cleaning The Device - Siemens SIMATIC IFP2200 Product Information

Protection against foreign objects and water
Degree of protection in accordance with IEC 60529 Explanation
Front
Rear panel
The device has all-round IP20 (Enclosure Type 1) in the factory state. To achieve higher protection classes, the device must be
installed with the appropriate seal.

Cleaning the device

The device is designed for low-maintenance operation. You should still clean the device front regularly, however.
WARNING
Unwanted reactions when cleaning the device
You risk unintentional actuation of operator controls if you clean the device while it is switched on.
You may possibly trigger unwanted actions of the device or controller. that are liable to cause personal injury or damage to
the machinery.
Switch off the device before cleaning it.
Note
Dust
When dust has collected on the device, the dust deposits must be removed at appropriate time intervals.
Requirement
• Cleaning cloth
• Dishwashing liquid or foaming screen cleaning agent
Cleaning agents
The unit may only be cleaned at the front with cleaning agents.
NOTICE
Damage to the device due to impermissible cleaning agents
Impermissible and unsuitable cleaning agents can cause damage the device.
Use dish soap or foaming screen cleaner only as cleaning agents. Do not use the following cleaning agents:
• Aggressive solvents or scouring powder
• Steam jets
• Compressed air
Observe the information on chemical resistance on the Internet "Chemical resistance of the HMI devices and industrial PCs
(https://support.industry.siemens.com/cs/ww/en/view/39718396)".
Procedure
1. Switch off the device.
2. Dampen the cleaning cloth.
3. Spray the cleaning agent on the cloth and not directly on the device.
4. Clean the device with the cleaning cloth.
Cleaning the Transceiver Unit
Clean the enclosure surface with a damp cloth and make sure that no water enters the device.
SIMATIC IFP2200/2400 ITC2200/2400 frameless
A5E48015893-AB, 10/2020
• IP65: Only bonding between glass and mounting frame
• IP20 (Enclosure Type 1, indoor use only)
• IP20
Protection against touching with back of hand.
There is no protection against ingress by water.
27