Technical Specifications - Siemens SIMATIC IFP2200 Product Information

Functions of the multi-touch screen
General functions
• Detection of up to 5 finger touches at a time.
• Detection of gestures that are supported by the operating system or the software installed on the device.
Note
Multi-touch operation can provide advanced features or pose limitations depending on the operating system and the
software installed on the device. Read the corresponding documentation.
• You do not need to calibrate the touch screen. Some operating systems do offer touch calibration. However, this
calibration does not result in an improvement of the accuracy.
Security functions in an industrial environment
The touch screen is locked for security reasons when following happens:
• There is a conductive liquid on the touch screen with ground contact via the enclosure or the operator, for example.
• Electromagnetic interference is present that exceeds the specification according to EN 61000-4-2.
Once the interference is over, the touch screen is no longer locked.

Technical specifications

Technical specifications
Device
Safety
Approvals
Overvoltage category
Electrical data
Rated voltage
Permitted voltage range
Mechanical data (without packing)
Width
Height
Depth
Weight
22
IFP2200 frameless ITC2200 frameless
522 mm
324 mm
68 mm
4.5 kg 5.0 kg
IFP2400 frameless
See rating plate
II for all U
N
24 V DC
+19.2 V to +28.8 V
78 mm 68 mm
5.5 kg
SIMATIC IFP2200/2400 ITC2200/2400 frameless
ITC2400 frameless
578 mm
356 mm
78 mm
6.0 kg
A5E48015893-AB, 10/2020