Technical Specifications Of The Ifps - Siemens SIMATIC HMI Series Operating Instructions Manual

7.8

Technical specifications of the IFPs

Weight of the built-in units
Weight without packaging, with
strain-relief plate
Weight of the PRO devices for support arm (not extendable, flange top) and for pedestal (extendable,
flange bottom)
Weight without packaging, with
strain-relief plate
Weight of the PRO devices for support arm (extendable, round tube)
Weight without packaging, with
strain-relief plate
Display
Type
Active display area
Resolution
Possible colors
Brightness control
Backlighting
Half Brightness Life Time (MTBF
Pixel error class in accordance with
ISO 9241-307
MTBF: Operating hours after which the maximum screen brightness is reduced by half compared to the original value.
1
MTBF is increased by using the integrated dimming function, for example time-controlled via screen saver or centrally
via PROFIenergy.
IFP V2, IFP V2 PRO
Operating Instructions, 08/2019, A5E46641410-AA
15" built-in devices
3.3 kg
15" PRO devices
4.0 kg
15" PRO devices
4.7 kg
15" devices
15.6''
344.2 x 193.5 mm
1920 × 1080 pixels
LED
) 50000 h
1
7.8 Technical specifications of the IFPs
19" built-in devices 22" built-in devices
4.4 kg
19" PRO devices 22" PRO devices
5.7 kg
19" PRO devices 22" PRO devices
6.4 kg
19" devices
LCD widescreen TFT
18.5''
409.8 x 230.4 mm 475.2 x 267.3 mm
1920 × 1080 pixels 1920 × 1080 pixels
Up to 16 million
Yes, using PDT software
II
Technical information
24" built-in devices
5.8 kg 7.2 kg
6.7 kg
7.4 kg
22" devices 24" devices
21.5'' 23.8''
527.0 x 296.5 mm
1920 x 1080 pixels
LED
30000 h
109