Pro Devices; Permitted Mounting Positions - Siemens SIMATIC HMI Series Operating Instructions Manual

Installing and connecting the device
3.1 Preparing for installation
3.1.3

PRO devices

3.1.3.1

Permitted mounting positions

The device is intended for mounting on a support arm or stand.
Position the device in such a manner that safety-related devices such as a mains isolation
switch remain visible, accessible and operable.
The following figures show the permissible mounting positions of the different PRO devices.
PRO devices for support arm (not extendable, flange top) and for pedestal (extendable,
flange bottom)
PRO devices for support arm (extendable, round tube)
Note
It is not permitted to install a PRO device in portrait format.
42
Operating Instructions, 08/2019, A5E46641410-AA
IFP V2, IFP V2 PRO