Related Manuals for Siemens SMD 18101 CS
Summary of Contents for Siemens SMD 18101 CS
- Page 1 Instruction Manual Version 11/2005 18” Gray Scale Flat Panel Display SMD 18101 CS SMD 18101 CP SMD 18101 D display SOLUTIONS SOLUTIONS...
- Page 3 Introduction Safety notes Description LC displays for medical diagnostics Application planning 18" Gray Scale Flat Panel Display SMD 18101 CS / SMD 18101 CP / Assembling SMD 18101 D Connecting Instruction Manual Commissioning Operation Maintenance, service and disposal Fault diagnostics...
-
Page 4: A5E00472377A
Trademarks All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. -
Page 5: Table Of Contents
User groups and program levels....................7-4 7.3.3 Key functions in OSD menu....................... 7-4 7.3.4 Main menu ..........................7-5 7.3.5 Function description of OSD ...................... 7-6 7.3.6 Force Mode ..........................7-15 SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... - Page 6 Rear view ..........................12-5 12.2.4 Plan view ..........................12-5 12.3 Display stand..........................12-6 12.3.1 Front view..........................12-6 12.3.2 View from left ........................... 12-7 Appendices.............................A-1 Invalidity of guarantee ........................A-1 SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
- Page 7 Table of contents Warranty............................. A-1 Repairs............................A-1 Environmental protection ......................A-1 Further devices .......................... A-1 Contact address ......................... A-1 Index..............................Index-1 SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
- Page 8 Table of contents SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 9: Introduction
Further documentation SMfit ACT® Basics The Instruction Manual for the "SMfit ACT® Basics" software is provided on the CD supplied, along with the program itself. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... - Page 10 Introduction 1.2 Further documentation SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 11: Safety Notes
Do not place any objects on top of the units Penetrating liquids may result in a fire or electric shock. Connecting No contact to a patient must be possible when handling the connection cables. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... - Page 12 11. The following applies to installations in the USA and Canada: Molded power supply connectors must comply with the requirements for "hospital grade attachments" CSA Std. C22.2 No. 21 and UL 498. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
- Page 13 See also Mounting of unit (Page 5-1) Cleaning (Page 9-1) Installation site (Page 4-1) General connection information (Page 6-1) SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
- Page 14 Safety notes SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 15: Description
• CD ROM with this Instruction Manual and SMfit ACT® Basics • European power cord • US power cord • DVI video cable • Video cable 15-contact Sub-D to 5x BNC • SMfit ACT-cable SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 16: Applications
(OSD) menu. In the delivered state, several adjustment curves can be selected. Further curves can be set using the SMfit ACT® calibration software and a Siemens photometer (Siemens Serial Spot Meter or Siemens Universal Serial Luminance Meter). - Page 17 The space between the protective glass and the panel is sealed against dust so that the internal surfaces cannot get dirty. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
- Page 18 Description 3.3 Important features SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 19: Application Planning
Installation on a desk The unit must be screwed onto a stand and installed on a hard horizontal surface (unit stand for SMD 18101 CS/CP can be ordered separately). Only the stands recommended by the manufacturer may be used. Avoid reflections on the screen The display has an anti-glare surface which is only effective with a clean, grease-free screen. - Page 20 Application planning 4.1 Installation site SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 21: Assembling
The following must be observed when mounting (100 mm hole spacing according to VESA standard): Information about the fastening screws Number Thread Strength Insertion depth Min. 8 mm/max. 10 mm Torque Max. 3 Nm SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... - Page 22 Assembling 5.1 Mounting of unit SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 23: Connecting
• Signal and power cables must not be routed in the same duct. • The display must not share a power supply with motors or valves (glitches!). See also Safety notes (Page 2-1) Electromagnetic compatibility (Page 11-6) SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 24: Connection Cover
• Pull the cable through the rectangular opening. • Hook the rear panel into the top of the stand, and latch in place by pressing at the bottom. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 25: Summary Of Signals And Connections
Summary of signals and connections Signal connections and DIP switches 6.5.1 Signal connections Ω Ω Ω Ω Ω Ω Ω Ω Figure 6-2 Arrangement of signal connections SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 26: Dip Switch
R, G, B and H DIP switches on the displays must be set to 10 kΩ. These DIP switches must be set to 75 Ω on the last display in the sequence. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... - Page 27 BNC socket (video input) • Connect video cable for the composite input to the Cinch socket. See also Summary of signals and connections (Page 6-3) SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 28: Connecting The Line Cord
Safety notes (Page 2-1) Service interface The display has a serial RS 232 interface. A PC/notebook computer with SMfit ACT® can be connected to this. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 29: Commissioning
Commissioning Note on commissioning Caution Commissioning must only be carried out by authorized personnel. Control elements and power switches Figure 7-1 Front view (with stand) SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 30: Switching On The Device
OSD must be locked if a faulty operation on the part of the user could have a detrimental effect on the approved application of the display. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 31: Description Of Osd Menu
Description of OSD menu 7.3.1 OSD overview Settings for the operation of the Flat Panel Displays are made at a picture source via the OSD menu. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 32: User Groups And Program Levels
Radio button to previous button Menu item or command Enter key Down Slider control Lower value Radio button to next button Always Exit current menu level SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 33: Main Menu
The main menu is displayed on your screen. 1. Select the desired submenu by repeatedly pressing the Menu key. 2. Open the selected menu item by pressing the Up key. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 34: Function Description Of Osd
- 128 ... +126) → Contrast Slider (basic setting is 0, Correct white level of panel range of adjustment - 128 ... +126) SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... - Page 35 • contrast. • The quality of the settings depends on the picture contents and the type of synchronization. All settings can of course SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
- Page 36 Note You cannot select a filter (and it is unnecessary anyway) if you have selected 1:1 display in the "Position / Zoom" menu. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
- Page 37 Slider control Setting of vertical position of OSD menu → Background Translucent / Opaque Selection of OSD background You can select a transparent or opaque background. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002...
- Page 38 Adjustment of brightness of display backlight Adjustment of overall brightness to ambient lighting. → ADC Calibration Automatically calibrate A/D converter for the applied video level SMD 18101 CS / SMD 18101 CP / SMD 18101 D 7-10 Instruction Manual, 11/2005, A5E00472377A-002...
- Page 39 Test and Reset A fault analysis can be carried out in this menu; in addition, the unit can be reset to the factory settings. SMD 18101 CS / SMD 18101 CP / SMD 18101 D 7-11 Instruction Manual, 11/2005, A5E00472377A-002...
- Page 40 The following are reset: Backlight • Sharpness • User color location • Signal settings • Black level settings • RGB relation • DPMS settings • Language • SMD 18101 CS / SMD 18101 CP / SMD 18101 D 7-12 Instruction Manual, 11/2005, A5E00472377A-002...
- Page 41 Minor frequency fluctuations within this range will not result in resynchronization ("Auto in progress"). SMD 18101 CS / SMD 18101 CP / SMD 18101 D 7-13 Instruction Manual, 11/2005, A5E00472377A-002...
- Page 42 Brief description of Force Modes 1 and 2 and of Modes 1 … 3 See also OSD overview (Page 7-3) Force Mode (Page 7-15) SMD 18101 CS / SMD 18101 CP / SMD 18101 D 7-14 Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 43: Force Mode
3. Enter the timing data into the separate data fields using the Menu, Up and Down buttons. 4. Select Mode 1. 5. Execute "Force" command. SMD 18101 CS / SMD 18101 CP / SMD 18101 D 7-15 Instruction Manual, 11/2005, A5E00472377A-002... - Page 44 Note: If the data field value in step 2 is at the limit, "Force" must be carried out. The value "Total horizontal lines" must be greater than the value "Horizontal resolution". 3. Select Mode 3. 4. Execute "Force" command. SMD 18101 CS / SMD 18101 CP / SMD 18101 D 7-16 Instruction Manual, 11/2005, A5E00472377A-002...
- Page 45 3. Use data field "Horizontal resolution" to match the right edge of the SMPTE image pixel- exact to the right internal border of the gray area. SMD 18101 CS / SMD 18101 CP / SMD 18101 D 7-17 Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 46: Make Settings
By using a screen saver with permanently changing screen contents, unnecessary effects of the same image are avoided. SMD 18101 CS / SMD 18101 CP / SMD 18101 D 7-18 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 47: Adjusting The Image Geometry
The brightness and contrast must be adjusted for the respective graphics card in the system on site. This is necessary because the different output levels from different graphics cards significantly influence picture reproduction. SMD 18101 CS / SMD 18101 CP / SMD 18101 D 7-19 Instruction Manual, 11/2005, A5E00472377A-002... - Page 48 • Adjust the contrast such that the smaller square with 95% brightness is visible in the white square (100% brightness). • To adapt the luminosity to the ambient lighting, adjust the backlight brightness. SMD 18101 CS / SMD 18101 CP / SMD 18101 D 7-20 Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 49: Operation
Following commissioning, operation is limited to switching on and off. • Switch on the device using the power switch. The green operation LED now lights up permanently. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 50: Control Elements
Operation 8.3 Control elements Control elements Figure 8-1 Front view (with stand) Figure 8-2 Keypad and status display SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 51: Maintenance, Service And Disposal
SMD 18101 CP version with protective glass is considerably more susceptible to this kind of damage. • The fuse may only be replaced by Siemens-approved repair centers to prevent consequential damage to the display. • Remove water drops immediately; extended contact with water discolors the surface. -
Page 52: Disposal
EU: The units must be marked in accordance with Directive 2002/96/EC (WEEE) and disposed of in accordance with the relevant standards. In the case of other countries, the applicable local regulations must be observed. SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 53: Fault Diagnostics
Fault diagnostics Caution The fuse may only be replaced by Siemens-approved repair centers to prevent consequential damage to the display. Error Cause Remedy No picture appears on the Blown fuse Inform Servicing department display, operation LED off Power supply cable not inserted Check power supply cable or incorrectly inserted. - Page 54 Fault diagnostics SMD 18101 CS / SMD 18101 CP / SMD 18101 D 10-2 Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 55: Technical Data
100 V ... 240 V AC (± 10 %) TN-S system with PE conductor Line frequency 50/60 Hz (± 10 %) Power consumption < 75 VA SMD 18101 CS / SMD 18101 CP / SMD 18101 D 11-1 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 56: Electronics
RGB and picture blanking signals analog, C-SYNC on green (SoG) Signal inputs via BNC Assignment of the 5x BNC sockets Socket 1: • Socket 2: • GREEN/SoG SMD 18101 CS / SMD 18101 CP / SMD 18101 D 11-2 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 57: Video Inputs
2x video sockets (mini-DIN and BNC) • 1x service socket (RJ 11) • 1x RJ 11 socket for serial bus • 1x 5 V/1 A output socket • SMD 18101 CS / SMD 18101 CP / SMD 18101 D 11-3 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 58: Mechanical Design
Supplied with stand Protective glass Weight 9.9 kg Weight incl. packaging 12.6 kg Dimensions (W x H x D) in mm 410 x 406 x 240 SMD 18101 CS / SMD 18101 CP / SMD 18101 D 11-4 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 59: Climatic Conditions
9 ... 500 Hz at 10 m/s² Shock To EN 60068-2-29 250 m/s², 6 ms (in storage packaging) Dropping when packed To EN 24180-2 Drop height: 80 cm SMD 18101 CS / SMD 18101 CP / SMD 18101 D 11-5 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 60: Safety Specifications
EN V 50204 (pulsed) 895/900/903.5 MHz 10 V/m 50% duty cycle EN 61000-4-8 30 A/m Magnetic constant fields Max. 4000 A/m Magnetic alternating fields Max. 1000 A/m SMD 18101 CS / SMD 18101 CP / SMD 18101 D 11-6 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 61: Dimension Drawings
Dimension drawings 12.1 SMD 18101 CS/CP 12.1.1 Front view SMD 18101 CS / SMD 18101 CP / SMD 18101 D 12-1 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 62: View From Left
Dimension drawings 12.1 SMD 18101 CS/CP 12.1.2 View from left 12.1.3 Rear view SMD 18101 CS / SMD 18101 CP / SMD 18101 D 12-2 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 63: Plan View
Dimension drawings 12.2 SMD 18101 D 12.1.4 Plan view 12.2 SMD 18101 D 12.2.1 Front view SMD 18101 CS / SMD 18101 CP / SMD 18101 D 12-3 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 64: View From Left
Dimension drawings 12.2 SMD 18101 D 12.2.2 View from left SMD 18101 CS / SMD 18101 CP / SMD 18101 D 12-4 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 65: Rear View
Dimension drawings 12.2 SMD 18101 D 12.2.3 Rear view 12.2.4 Plan view SMD 18101 CS / SMD 18101 CP / SMD 18101 D 12-5 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 66: Display Stand
Dimension drawings 12.3 Display stand 12.3 Display stand 12.3.1 Front view SMD 18101 CS / SMD 18101 CP / SMD 18101 D 12-6 Instruction Manual, 11/2005, A5E00472377A-002... -
Page 67: View From Left
Dimension drawings 12.3 Display stand 12.3.2 View from left SMD 18101 CS / SMD 18101 CP / SMD 18101 D 12-7 Instruction Manual, 11/2005, A5E00472377A-002... - Page 68 Dimension drawings 12.3 Display stand SMD 18101 CS / SMD 18101 CP / SMD 18101 D 12-8 Instruction Manual, 11/2005, A5E00472377A-002...
-
Page 69: Appendices
Warranty All commitments on the part of Siemens AG are contained in the respective sales contract which also contains the complete and solely applicable warranty conditions. These warranty conditions in the contract are neither extended nor limited by the contents of this publication. -
Page 70: A.6 Contact Address
Appendices A.6 Contact address SMD 18101 CS / SMD 18101 CP / SMD 18101 D Instruction Manual, 11/2005, A5E00472377A-002... -
Page 71: Index
SMD 18101 D, 11-4 Display Avoid reflections on the screen, 4-1 Ceiling or stand mounting, 5-1 Cleaning agents and disinfectants, 9-1 Mains connection, 11-1 SMD 18101 CS / SMD 18101 CP / SMD 18101 D Index-1 Instruction Manual, 11/2005, A5E00472377A-002... - Page 72 See also serial interface, 11-3 Shielding measures, 6-1 SMfit ACT® Basics, 1-1 Universal Serial Luminance Meter Adjustment of brightness and contrast, 7-19 US power cord, 3-1 SMD 18101 CS / SMD 18101 CP / SMD 18101 D Index-2 Instruction Manual, 11/2005, A5E00472377A-002...
- Page 74 Siemens AG Automation and Drives Systems Engineering Display Technologies Siemensallee 84 76187 KARLSRUHE GERMANY Order No.: A5E00472377A-002 www.siemens.com/displays...