Mobile Phone - Philips 8000 Series User Manual

Pair the earpieces with
your Bluetooth device at
the st time
Make sure that the headset is fully
charged and powered o .
Open the top cover from charging
box, press and hold the pairing
button from charging box back for
approximately 3 seconds
03"
The LED on both earpieces ash in
white & blue alternately.
The earpieces are now in
pairing mode and is ready to
pair with a Bluetooth device
(e.g. a mobile phone)
Turn on the Bluetooth function of
your Bluetooth device.
Pair the earpieces with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
Note
 After powering on, if the earpieces cannot nd
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
The following example shows you
how to pair the earpieces with
your Bluetooth device.
Turn on the Bluetooth function
of your Bluetooth device, select
Philips TAT8505.
Enter the earpieces password
"0000" (4 zeros) if prompted. For
those Bluetooth devices featuring
Bluetooth 3.0 or higher, no need to
enter a password.
Single earpiece (Mono mode)
Take either right or Left earpiece out
from charging box for Mono use. The
earpiece will power on automatically.
There will be a voice "Power on" from
earpiece.
Note
 Take the second Earpiece from the charging
box and they will pair each other automatically.
Pair the earpieces with
another Bluetooth device
If you have another Bluetooth device
that you want to pair with the earpieces,
make sure the Bluetooth function in any
other previously paired or coonected
devices are turned o . Then follow the
steps in 'Pair the earpieces with your
Bluetooth device at the rst time'.
Note
 The earpieces stores 4 device in the memory. If
you try to pair more than 4 devices, the earliest
paired device is replaced by the new one.
Philips TAT8505