Silvercrest STK 17 A1 Assembly, Operating And Safety Instructions page 18

have to be synchronized in regard of the
encryption. Every transmitter is working
with a different encryption of the signal.
Synchronise the transmitter and
receiver as follows:
As soon as the batteries are installed,
the receiver enters synchronizing
mode for approx. 2 minutes. During
the synchronizing mode, the signal in-
dicator
color.
You can also manually enter syn-
chronising mode by holding the
synchronising button
3 seconds.
The signal indicator
will steadily light up for approx.
1 minute, to indicate that the receiver
is in synchronizing mode.
Press the chime button
transmitter, while the receiver is in
synchronise mode. If the receiver
receives the signal, the steady blue
18 GB
steadily lights up in blue
1
for approx.
3
on the receiver
1
of the
11