Download Print this page

Advertisement

Quick Links

thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
GENERAL SAFETY
1.1.
 familiarise yourself with the applications, limitations, and potential hazards of the lux meter.
 Keep the lux meter clean and in good condition.
 If using to assess bright lights, apply common sense regarding eye protection.
 DO NOT operate the meter in a flammable or explosive atmosphere.
 DO NOT get the lux meter wet or use in damp or wet locations or areas where there is condensation.
 DO NOT use the lux meter for any purpose other than that for which it is designed.
 DO NOT allow untrained persons to operate the lux meter.
 DO NOT operate the lux meter when you are tired or under the influence of alcohol, drugs or intoxicating medication.
 WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions
and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
2. INTRODUCTION & SPECIFICATION
High precision portable light meter with silicon photodiode and filter. Includes a large back-lit LcD screen that displays in either lux or
fc. Ideal for general use or ensuring sufficient lighting in workshop or office environments. features Max./Min., data hold, auto power off
and calibration procedure. supplied in storage case with 9V battery.
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TA065
range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-99999 lux /0-9999fc
Accuracy: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±6%
sample rate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 times per second
Battery: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 x 9V (supplied)
fig.1
© Jack sealey Limited
InstructIons for:
LU X METE R
MoDEL no :
1 . . . Light sensor
2 . . . LcD Display
3 . . . on/off Key
4 . . . Hold Key
5 . . . Lux selector Key
6 . . . Max/Min Key
7 . . . fc selectorKey
8 . . . Backlight Key
9 . . . Light sensor cap
Original Language Version
TA065
tA065
Issue: 1 - 19/02/14

Advertisement

loading

Summary of Contents for Sealey TA065

  • Page 1 TA065 MoDEL no : thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
  • Page 2 4 above. under the Waste Batteries and Accumulators regulations 2009, Jack sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries ber (BPrn) is BPrn00705.