Table of Contents
Advertisement
5
Waterproofing Outdoor Connectors
•The connectors between the flexible waveguide and antenna and between the elliptical waveguide and
flexible waveguide must be waterproofed. The methods for waterproofing them are the same. The
following describes how to waterproof the connectors between the elliptical waveguide and flexible
waveguide.
1
Wrap one layer of PVC tape.
3
Wrap three layers of PVC tape over the
waterproof insulation tape.
2
Wrap three layers of waterproof insulation
tape.
4
Use the outdoor bundling strap to bind
the PVC tape tight at both ends. Cut off
the extra cable strap after the PVC tape
is tightened.
47
Advertisement
Table of Contents
