Bosch TPA 300 User Manual page 40

Read instructions and
press CONTINUE to
access to the next step.
Please wait during the
connection process.
When both the TPA 300
and the Bosch scan tool
are ready the following
screen will display.
In the meantime, the TPA
300 screen will change to
the TPMS sensors
triggering screen with the
matching vehicle already
selected.
At this stage, you have to read all the TPMS sensors IDs using the TPA 300 tool, exactly
the same way you do in Standalone mode. If you are not already familiar with this
procedure, please read the dedicated section in this user manual.
UM-BTPA1-6 38/54
TPA 300 user guide
User guide BOSCH TPA 300