Universal Serial Bus (Usb 2.0) Ports; Using The Usb Diskette Drive; Connecting The Usb Diskette Drive - Toshiba PA3314U User Manual

User's Manual

Universal Serial Bus (USB 2.0) ports

A USB mouse, keyboard, and/or diskette connected to the Port Replicator via any
connection other than a first tier hub, will not work until the OS has started.

Using the USB diskette drive

A 3 1/2" diskette drive connects to the Port Replicator's USB port. It accommodates
1.44-megabyte or 720-kilobyte diskettes.

Connecting the USB diskette drive

To connect the drive, plug the diskette drive connector into a USB port. Refer to
Figure 4-3.
NOTE: Make sure the connector is upside down and properly aligned
with the socket. Do not try to force the connection, doing so can damage
the connecting pins.
Figure 4-3 Connecting the USB diskette drive to the computer
NOTE: If you connect the diskette drive after turning on the computer, it
will take several seconds for the computer to recognize the drive. Do not
disconnect and reconnect before this time has elapsed.
4-4