Advertisement
3. SPECIFICATION
Model No: ............................................................. HT106LED
Lumen Output: ............................................................. 180lm
Battery: .....................................................3.7V 1.5Ah Li-Poly
LED Qty: .........................................................3W CREE (x1)
Operating Time: .............................. 3hr @100%, 9hr @ 30%
Charging Time: ..................................................................4hr
4. OPERATION
4.1.
Charging refer to fig.2
4.1.1.
Connect the USB lead to the socket on the bottom of the battery, see fig.2 and a USB power socket. Turn on the power supply. The
LED charging light on the bottom of the battery will light RED to show that charging has commenced.
4.1.2.
When the battery is fully charged the LED will light GREEN.
4.2.
Operation refer to fig.1
4.2.1.
Press the on/off switch once for full light, twice for 30% light and three times for flashing light.
4.3.
Auto-sensor refer to fig.1
4.3.1.
Press the auto-sensor button once to turn it on, the button will glow red.
4.3.2.
Pass your hand in front of the sensor to turn the light on/off as required.
4.3.3.
Turn the auto-sensor function off by pressing the auto-sensor switch once.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Fig.2
01284 703534
Original Language Version
sales@sealey.co.uk
www.sealey.co.uk
HT106LED.V2 Issue: 3(SP) - 27/09/17
Advertisement
