Example Of Reading Output Data - Siemens CP 1626 Operating Instructions Manual

4.4.6

Example of reading output data

Description
The bits with addresses 100.0 to 100.7 of the output submodule and a length of 1 byte are
written by the process controller user program. The IO controller for the control level reads
this data.
The table and figure show which bits are read by the IO controller for the control level via
transfer submodule 1.
I/O bits of the IO controller for
the control level
1.0
to
1.7
CP 1626
Operating Instructions, 11/2018, C79000-G8976-C434-03
Transfer relationship (from the
perspective of the IO controller
for the control level)
read
-
read
Operating hardware
4.4 IO routing
I/O bits of the IO controllers for
the process level
100.0
to
100.7
61