Two De Displays At The Control Cabinet Pcs Pr31 And Pr4X - Bosch Rexroth ctrlX HMI DE0015 Operating Instructions Manual

ctrlX HMI DE0015, DE0021 Multi-Touch
Displays (Housing Devices)
Fig. 11-3:
If the video connection and the USB connection have to be modified
for a DE device after a successful initial commissioning, always set
the new connection in the On-Screen menu to ensure a correct func-
tioning.

11.2.2 Two DE displays at the control cabinet PCs PR31 and PR4x

A display is connected to the control cabinet PC via a CDI+ connection and an-
other display is connected via a Displayport connection and a USB connection.
Fig. 11-4: Connection via standard interface and long distance interface CDI+
After switching on the control cabinet PC and the two DE displays, the switch-
on behavior is identical to the behavior of the single display operation described
above. The displays detect the current connection. "DP" or "RX" is shown in the
lower left corner of the display. To ensure a proper function of the video and
USB connection for the DE device with Displayport and USB connection, set the
video input via the On-Screen menu on the Displayport ("Input DP").
If the video connection and the USB connection have to be modified
for a DE device after a successful initial commissioning, always set
the new connection in the On-Screen menu to ensure a correct func-
tioning.
Setting up the multi-touch operation in the extended Desktop mode:
1. Restart the Windows Control Panel
2. Select "Tablet PC Settings" and press the "Setup" button.
3. The message "Touch this screen to identify it as the touchscreen" is dis-
played.
4. Touch the screen. Message: "Press enter to proceed to the next step to
complete your configuration".
Brightness
Video Input
PIP
Touch
Exit
Displayport
XDP XDP
USB
XUSB XUSB
Input DP
Input HDMI
Input RX
Exit
CDI+
XETH XETH
max. 100 m
R911405731_Edition 02 Bosch Rexroth AG
33/45
Commissioning