4. Follow the procedures in
Removing the Heatsink
1. Follow the procedures in
2. Remove the:
a.
cover
b.
processor fan module
3. Perform the following steps as shown in the illustration:
a. Remove the screws that secure the heatsink to the system board [1].
b. Lift the heatsink away from the system board [2].
Installing the Heatsink
1. Place the heat sink on the system board.
2. Tighten the screws to secure the heatsink.
3. Install:
a.
processor fan module
b.
cover
4. Follow the procedures in
Removing the PS2 and Serial Connector Board
1. Follow the procedures in
2. Remove the cover.
3. Perform the following steps as shown in the illustration:
a. Disconnect the cable from the PS2 and serial connector board [1].
b. Remove the screws that secure the PS2 and serial connector board to the base panel [2].
c. Slide and lift the PS2 and serial connector board away from the computer [3].
After Working Inside Your
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
Computer.
Demontáž a montáž součástí
27