Silvercrest LHL 2000 B1 Operating Instructions Manual page 9

Initial use
Items supplied and transport inspection
The appliance is delivered with the following components as standard:
● Fan heater
● This operating manual
NOTICE
► Check the contents to ensure everything is available and for signs of visible damage.
► If the delivery is not complete or is damaged due to defective packaging or through
transportation contact the Service Hotline (see chapter Service).
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging materials are
selected from the point of view of their environmental friendliness and disposal technology and
are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and
reduces generated waste. Dispose of packaging material that is no longer needed
according to the regionally established regulations.
Requirements on the set-up location
For safe and faultless operation of the appliance the set-up location must satisfy the following
criteria:
The appliance must be placed on a firm, flat and horizontal surface.
Minimum spacings to the housing of 50 cm to the sides, 50 cm above, 50 cm
to the rear and 100 cm to the front must be maintained.
Do not place the appliance in a hot, wet or very moist environment or in the
vicinity of flammable materials.
The mains power socket must be easily accessable so that, in an emergency,
the mains power cable can be easily disconnected.
Environment temperature range: 0 to +40 °C
Humidity (no condensation): 5 - 75 %
■ 6 │ GB │ IE │ NI
LHL 2000 B1