D-Link COVR User Manual page 22

Section 3 - Configuration
Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this
option if your ISP does not specify an IP address to use.
Advanced Settings
Host Name: The host name is optional but may be required by some ISPs. Leave
it blank if you are not sure.
Primary DNS
Enter the primary DNS server IP address assigned by your ISP. This
Server: address is usually obtained automatically from your ISP.
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address The default MAC address is set to the physical interface MAC address
Clone: of port 1 on the master COVR Point. You can use the drop-down menu
to replace the Internet port's MAC address with the MAC address of
a connected client.
Click Save when you are done.
D-Link COVR-1102 User Manual
Dynamic IP (DHCP)
18