Note For Replacement Of Ic Or Board - Sony PXW-X500 Service Manual

1-6.

Note for Replacement of IC or Board

This section explains the necessary setups required when replacing ICs or parts.
• When any of the following boards is replaced, upgrade the firmware version.
All data are written at once when upgrading the firmware version. (Refer
Camcorder".)
Board Name
AU-360
DCP-67
DPR-362
FP-208
HPR-53
TG-287
• When the following board is replaced, upgrade the firmware version alone. (Refer to
Recording/Wireless LAN Connection
Board Name
WM
• Adjusted values are stored in the following boards and parts. The values need to be readjusted when they are
replaced.
Board Name
*1
TG-287
DPR-362
WM
• Service of PA-422/423/424 boards
The PA-422/423/424 boards cannot be replaced on the board-level service or part-level service. If parts become
defective, replace the entire CCD block.
*1: The adjusted values for the CCD block are stored in the TG-287 board.
PXW-X500
Ref. No.
IC800
IC503
IC0703, IC2200, IC2500, IC3101, IC3102, IC3704, IC4400,
IC4602, IC4903, IC5002
IC302.IC404,IC503
IC800, IC801
IC104
Function".)
Ref. No.
U11
Ref. No.
IC008
IC703 (The same data are stored in the IC008 on the TG-287
board), IC2002, IC3101, IC3102, IC4400, X2000
U12
to"1-12-1. Upgrade Firmware for
"1-12-2. Upgrade of Proxy
1-26