Base Unit (Bu-D1Bd73U); Optical Pick-Up Block (Da11Mmvgp) - Sony HCD-FX200 Service Manual

HCD-FX200/FX205
2-7.

BASE UNIT (BU-D1BD73U)

Note1: This illustration sees the top panel block from base unit side.
4 two vibration proof rubbers
1 four floating screws
(PTPWH M2.6)
7 base unit
(BU-D1BD73U)
2-8.

OPTICAL PICK-UP BLOCK (DA11MMVGP)

Note1: When disconnecting the wire (fl at type) (16 core) of optical pick-up block, solder the short-land.
7 optical pick-up block
(DA11MMVGP)
1 Remove four solders.
8
(green)
2
5 tapping screw (P2)
3 two vibration proof rubbers
(red)
5 four claws
Note 2: Four claws might be fixed by bond.
Please fix four claws by the bond when
you replace the cover (D1).
6 cover (D1)
2 Solder the short-land.
Note 2: When assembling the optical pick-up block,
remove the solder of short-land after
connecting the wire (flat type) (16 core).
6 shaft (support)
3 wire (flat type) (16 core) (optical pick-up)
4 BD73U board block