Table of Contents
Advertisement
Choose "Redundant Ctlr Function___",
and then press ENT. (Note: The current
setting will be displayed on the LCD. If
this controller has never been set as a
redundant controller before, the default
setting
of
the
redundant
function
is
Disabled.
"Redundant Ctlr Function Disable" will be
displayed on the LCD. Press ENT to go to
the next step.)
The message "Enable Redundant Ctlr:
Autocfg?" will appear. Use t or s to
scroll
through
the
available
("Primary," "Secondary" or "Autocfg").
Press ENT for two seconds on "Primary."
The message "Redundant Ctlr Primary
Inactive" will appear.
Power-off Controller 1, then power-on
Controller
2.
Set
Controller
"Secondary" as described in the above
steps.
Power-off Controller 2.
194
Redundant Ctlr
Function Disable
controller
The
message
Enable Redundant
Ctlr: Autocfg ?
options
Redundant Ctlr
Primary Inactive
Redundant Ctlr
2
to
Secndry Inactive
User's Guide
Advertisement
Table of Contents
