Parameter settings of the GP-IB interface module (master mode)
1.
Set "Basic settings" of the module parameters of the GP-IB interface module as shown below.
[Navigation window] [Parameter] [Module Information] Module model name [Basic settings]
2.
Set "Application settings" of the module parameters of the GP-IB interface module as shown below.
[Navigation window] [Parameter] [Module Information] Module model name [Application settings]
3.
Write the set parameters to the CPU module. Then, reset the CPU module or power off and on the system.
[Online] [Write to PLC]
7 COMMUNICATION EXAMPLES
32
7.2 Program Examples