Installing The Turbocharger - ABB axial A100-M Series Original Assembly Instructions

Assembly Instructions / A170-M, A175-M
4 Installing the turbocharger / ​
4

Installing the turbocharger

WARNING
Risk of tipping
If the turbocharger is not sufficiently supported or not supported at all dur-
ing removal and installation, it may tip over and cause severe injury to per-
sonnel or accidents resulting in fatalities.
Support the turbocharger at a suitable location.
u
Secure with lifting gear wherever possible.
u
Fig. 4: Turbocharger suspension points
If present: Remove insulation segment on the bearing casing.
u
Attach lifting gear to the suspension lug of the bearing casing and the turbine-end foot.
u
Remove the covers from the oil connections.
u
Align turbocharger and place on bracket.
u
© Copyright 2020 ABB. All rights reserved. HZTL455311P0007_EN Rev.A July 2020