Attaching/removing au Micro IC Card
(LTE)
• Before attaching/removing the au Micro IC Card (LTE),
make sure to turn the FJL21 off and remove the battery
pack.
■ Attaching the au Micro IC Card (LTE)
a
Hook your finger by the tab and pull the tray
straight
• Tray for au Micro IC Card (LTE) is designed not to be
removed. When pulling the tray out, check the tray pull-out
line as a guide and do not pull it out forcibly. Pulling out
forcibly could damage the tray.
Tab
a
b
Place au Micro IC Card (LTE) facing the IC
(metal) part up and push the tray in
• Make sure the direction of the cutoff.
• For removing battery pack, see "Removing the battery
pack" ( P.31).
32
b
Notch
■ Removing au Micro IC Card (LTE)
a
Pull out the tray hooking your finger by the
tab to take the au Micro IC Card (LTE) out
Tab
◎ Note the following points, otherwise handling the au Micro IC Card
(LTE) may cause malfunction or damage.
• Try not to touch the IC (metal) part of the au Micro IC Card (LTE) or
the IC card terminal inside the FJL21.
• Insert in the correct direction.
• Do not use force to attach or remove.
◎ When an au Micro IC Card (LTE) is not attached properly or au Micro
IC Card (LTE) is abnormal, an error message appears.
◎ Do not lose the au Micro IC Card (LTE) after it has been removed.