Operation - Silvercrest SDO 3 A1 Operation And Safety Notes

˜ Operation
Connect with PC
Switch your computer ON and wait until the operating
system (OS) has booted up .
Connect the USB input cable 8 to a free USB port on your
computer . The required drivers are installed automatically
upon connection .
You will now be able to connect USB devices to the USB
output ports 5 for access to USB 2 .0 connections with
delivery speeds of up to 480 mbps .
Connecting a smartphone with charging and
data cable
Feed the charging and data cable (not included) of your
smartphone through the cable duct (rear) 9 of the product
from below (fig . A), so that it protrudes upwards out of the
smartphone holder 2 (fig . B) .
Place the smartphone charging and data cable in the
holder for the charger plug 7 (fig . C) . Ensure that the
holder for the charger plug is holding firmly with the cable
plug (fig . D) .
Place the smartphone charging and data cable including
the holder for the charger plug 7 into the smartphone
holder 2 (fig . E) .
You can now place your smartphone into the smartphone
holder 2 and connect with the plug of the charging and
data cable (fig . F) . Connect the other end of the charging
and data cable to the USB output ports 5 for charging /
data transfer .
28 GB/IE