Silvercrest SMRP 5200 A1 Operating Instructions Manual page 30

WARNING! Risk of material damage
If you notice any abnormalities (e.g. unusual noises, strange
smells or smoke), switch the device off immediately, unplug it
from the wall socket if necessary and remove all cables. Do not
use the device any longer.
If the device is moved from a cold location to a warm location,
condensate may form in the device. Leave the device switched
off for a few hours (at least approx. 2 hours).
Protect the device against damage, e.g. from:
- drips and water splashes
- heat, direct sunlight and open flames
- knocks and similar violent effects
Candles and other open flames must be kept away from this
product at all times in order to prevent the spread of fire.
Protect connected cables (not included in the items supplied)
from damage from e.g.:
- sharp edges
- hot places
- clamping or crushing
Do not use any astringent or abrasive cleaning agents.
In order to avoid any hazards, do not make modifications to the
device. Repairs must be carried out by a specialist workshop or
the Service Centre.
Only use the original accessories supplied (EU plug 7 / UK
plug 8).
28
GB