Cleaning And Storing - Silvercrest SMRP 5200 A1 Operating Instructions Manual

NOTES:
• Please note that the LED display shows only an approximate
value of the actual charging state of the integrated powerbank
of the device.
• When the battery capacity is less than approx. 10 %, the last
control LED 2 flashes.
• After interrupting the charging process using the button
the charging process can be started again by briefly pressing
the button
• If no device is connected, press the button
play the charging state. The LED display goes out after approx.
5 seconds.
8.

Cleaning and storing

NOTE: disconnect all cable connections.
• Clean the device with a slightly damp cloth. Solvents, spirits,
thinners etc. must not be used, as they can damage the surface
of the device.
• When not using the device, store it in a place where neither
high temperatures nor moisture can affect it.
• In order to maintain the device performance, it should be fully
charged regularly (approx. every 2 months).
• Charge the device before storing it away for a prolonged
period. Please note that if the device is stored for too long, this
may reduce the battery capacity. Avoid a deep discharge of the
battery.
3.
3,
3 in order to dis-
GB
33