Get Started; Charge The Headphones; Pair The Headphones With Your Mobile Phone - Philips 6000 Series User Manual

3 Get started

Charge the headphones

Note
Charge the headphones with the supplied USB
Type-C cable for two hours for optimum
battery capacity and lifetime.
Use only the original USB Type-C charging
cable to avoid any damage.
headphones before battery charging.
Plug the USB Type-C plug of the cable
to the headphones, another end plug
into a powered USB port. The LED turns
Amber during charging and turns white
when the headset is fully charged.
Tip
Normally, a full charge takes 2 hours.
Pair the headphones with
your mobile phone
Before using the headphones with your
with the mobile phone. A successful
pairing establishes a unique encrypted
link between the headset and the
mobile phone.
Make sure that the mobile phone is
turned on and its Bluetooth feature
is activated.
Make sure that the headphones is
Press and hold "MFB" Button for 4
seconds until the LED starts
The headphones is in pairing mode,
The list of Bluetooth from the
mobile phone shows "TAH6206", just
simply select "TAH6206" to pair with
the headphones.
TAH6206