Remote Display: Up-P16Dp - Sharp ER-A770 Installation Manual

3) Insert the UP-I16DP on the two latches
4) Raise the UP-I16DP toward you and put the two latches
the chassis.
B B
A
B
A
Fig. 12
Cautions: When installing the UP-I16DP on the lower cabinet,
align it with the line of the lower cabinet. Make sure it
settles inside the latch.
5) Make sure the display cable passes under it.
6) Connect to the display cable to the display connector.
of the lower cabinet.
into
A
7) Install the core on the cable and secure the cable with the clamp.
8) Install the display cover.

14. Remote display: UP-P16DP

When the remote display is installed, service resetting is required.
1) Connect to the Display cable
2) Fix the earth wire
UP-I16DP
Lower cabinet
Fig. 13
from the display unit with screw
Fig. 14
Note : The ER-A770 can only support 1 type customer display at
a time either the UP-I16DP or UP-P16DP.
to the display connector .
.