Ac 800M Controller Hardware, 3Bse036351 - ABB System 800xA Operations

Section 1 Safety Operator Warnings

AC 800M Controller Hardware, 3BSE036351*

This section lists the warnings mentioned in the AC 800M Controller Hardware
manual.
Warnings
Electrostatic Sensitive Device
Devices labeled with this symbol require special handling precautions as described
in the installation section.
Equipment Environment
All components, whether in transportation, operation or storage, must be in a
noncorrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to insure that contact with energized parts is
avoided when servicing.
Prefabricated aluminum profile
The AC 800M Controller and associated units must be unpowered and disconnected
when being mounted onto a DIN-rail!
It is not allowed to manipulate CEX bus baseplates in a powered and running
system. Before changing or removing a baseplate, all CEX modules on that segment
must be removed.
AC 800M units must be disconnected from the power source before removing them
from a DIN-rail!
It is not allowed to manipulate CEX bus baseplates in a powered and running
system. Before changing or removing a baseplate, all CEX modules on that segment
must be removed.
2PAA110888-600 - Warnings based on 3BNP004865-600 RevA
AC 800M Controller Hardware, 3BSE036351*
23