Sealey VS5281 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instruction protection
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this equipment.
‰
9 Read instructions thoroughly to ensure the safe and effective use. Important! Read instructions in conjunction with vehicle or
equipment manufacturer's workshop manual.
Maintain the apparatus in good condition. Before each use check condition of each component. If any component is damaged, replace
9
immediately. Use genuine parts only. Unauthorised parts may not function correctly.
Use in a suitable work area. Keep area free from unrelated materials and ensure that there is adequate lighting.
9
Keep children and unauthorised persons away from the working area.
9
DO NOT use the reamer, tap or insertion tool when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
DO NOT use the repair kit for any purpose other than that for which it is designed.
8
When not in use return parts to the case, and store it in a safe, dry, childproof location.
9
2. INTRODUCTION
Time and money saving kit for replacing damaged oxygen sensor threads with a new threaded insert. Kit includes installation tool, reamer, two
taps and five inserts in storage case.
3. SPECIFICATION
Model no. .................................................................. VS5281
Insert thread size ..............................................M18 x 1.5mm
Replacements inserts (pack of 5) ............................VS5281R
Tap sizes ......................................... M18 x 1.5, M20 x 1.5mm
4. CONTENTS
M18x1.5 tap
Ø18.60 reamer
M20x1.5 tap
© Jack Sealey Limited
OXYGEN SENSOR THREAD REPAIR KIT
MODEL NO:
Wear protective
clothing
Insertion tool
Original Language Version
VS5281
Threaded inserts.
VS5281 Issue:3 ( H,F) 22/10/20