Related Manuals for LG 21HK512D
Summary of Contents for LG 21HK512D
- Page 1 OWNER’S MANUAL MEDICAL MONITOR Please read this manual carefully before operating your set and retain it for future reference. 21HK512D Printed in Taiwan *MFL71428803* www.lg.com Copyright © 2019 LG Electronics Inc. All Rights Reserved. (2008-REV02)
-
Page 2: Table Of Contents
CONTENTS ON CLEANING Recommended Cleaning Chemicals ON CLEANING --------------------------------------------2 • Isopropanol 70 % ASSEMBLY AND PREPARING --------------------------3 • Ethanol 70 % • Cidex ® INITIAL INSTALLATION --------------------------------6 • 0.9 % NaCl solution How to Use Cleaner (When the screen has dust) USER SETTINGS ----------------------------------------11 •... -
Page 3: Assembly And Preparing
It is recommended that use the supplied components. • If you use generic cables not certified by LG, the screen may not display or there may be image noises. • Please check whether all the components are included in the box before using the product. If there are any Always use authorized components from the table of accessories shown below. - Page 4 Product and Button Description Power LED Indicator Front View LED Status Operation Description Green Normal operation Orange No signal/Power saving Light Orange Power saving when people leave LED off Power off NOTE • Under normal operation, Power LED Indicator will be off after 20 seconds in order not to affect the image Auto reading quality in dark room.
- Page 5 Rear View USB IN 1 USB IN 2 USB UP USB (MSD) DP IN DVI-D IN AC INPUT ON / OFF - One upstream two downstream ports. - Dual-Link DVI-D. - Peripheral USB device connection. - Digital Connection. - USB A. - AC power input.
-
Page 6: Initial Installation
INITIAL INSTALLATION Stand View Unit: mm (inches) To attach the LCD monitor to your system, follow these instructions 100 (3.9) Turn off the power of your computer. For connecting the PC: Connect the DVI-D cables or DisplayPort cables to the connector of the display card in your system. - Page 7 Moving and Lifting the Monitor Installing on a Table • Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm (3.9 When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or inches) away from the wall to ensure sufficient ventilation.
- Page 8 Adjusting the Stand Height Swivel stand Swivel 45 degrees and adjust the angle of the Monitor set to suit your view. Place the monitor mounted on the stand base in an upright position. Handle the monitor with both hands for safety. Max.
- Page 9 Raise the monitor up to the maximum height. Rotate the monitor clockwise or counter-clockwise as shown in the figure. Complete the installation by rotating the monitor 90° as shown in the figure. Adjust the angle of the monitor in the direction of the arrow as shown in the figure.
- Page 10 NOTE • Auto Pivot feature of the display is not supported. • The screen can be rotated easily using the screen pivot shortcut key provided with your Windows operating system. Note that some Windows versions and some graphics card drivers may use different settings for the screen pivot key or may not support the pivot key at all.
-
Page 11: User Settings
USER SETTINGS OSD Control Knob The OSD Control Knob is a multi-functional device located behind the Power LED Indicator on the right side of the front bezel. It has three movements-rotate upward, rotate downward and press inward as a button. Menu Settings Power On/Off Press the OSD Control Knob to power the unit on from the off stage... - Page 12 [Input] [Input] Description [DVI] Set current input to DVI. [DISPLAYPORT] Set current input to Displayport. [Picture] [Picture] Description [ALS] [Range] User define the ALS value. (Auto Luminance Stability) [300] Adjust brightness to 300 cd/m (±10%). [400] Adjust brightness to 400 cd/m (±10%).
- Page 13 [Gamma] [Gamma] Description [Gamma 1.8] Set Gamma curve to curve 1.8. [Gamma 2.0] Set Gamma curve to curve 2.0. [Gamma 2.2] Set Gamma curve to curve 2.2. [Gamma DICOM] Set Gamma curve for medical standard. (DIN6868-157) [Gamma User] Set Gamma curve for user mode. [Light Box] Full screen in white.
- Page 14 [OSD] [OSD] Description [Rotation] [Landscape] Set OSD Menu in landscape. [Portrait] Set OSD Menu in portrait. [Auto] Set OSD form by G-sensor. [Language] Sets the menu screen to the desired language. [OSD Position] Set horizontal and vertical position of OSD Menu. [OSD Timer] [10 sec.] Set OSD display time around 10 seconds.
- Page 15 [General] [General] Description [All Reset] [Yes] Reset all display and OSD setting to default value. [No] Exit this page. [APRX. Sensor] [Off] Disable [APRX. Sensor] function. [On] Set [APRX. Sensor] close the panel power when user isn’t in front of monitor. [Auto] Save the P-distance and enable [APRX.
-
Page 16: Troubleshooting
TROUBLESHOOTING Problem Check to see • Nothing is displayed on the screen The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Check the AC switch. Should be in the On position. •... -
Page 17: Product Specification
PRODUCT SPECIFICATION The product specifications are subject to change without prior notice for product improvements. “ ~ ” refers to alternating current (AC), “ ” refers to direct current (DC). LCD Screen Type TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Pixel Pitch 0.2115 mm x 0.2115 mm Resolution... - Page 18 Dimensions Monitor Size (Width x Height x Depth) With Stand 377 x 606 x 248.2 (mm) 14.8 x 23.8 x 9.7 (inches) Without Stand 377 x 473 x 89.6 (mm) 14.8 x 18.6 x 3.5 (inches) Weight With Stand 9.8 (kg) 21.6 (lbs) Without Stand 7.0 (kg)
- Page 19 Display Mode Pixel Frequency Frequency Standard Input 1 Input 2 Pixel Format CLK (MHz) H (kHz) V (Hz) Type DVI-D 1280 x 1024 63.96 60.0 VESA 1600 x 1200 75.00 60.0 VESA 1920 x 1080 148.5 67.50 60.0 VESA 1920 x 1200 193.6 74.60 60.0...
- Page 20 Supplier’s Declaration of Conformity Trade Name Responsible Party LG Electronics USA, Inc. 111 Sylvan Avenue, North Building, Address Englewood Cliffs, NJ 07632 The model and serial number of the product are located on the back and on one side of the product. Record E-mail lg.environmental@lge.com...