Panasonic SU-HTB550GK Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Home Cinema speakers
  5. SU-HTB550GK
  6. Service manual
Panasonic SU-HTB550GK Service Manual

Panasonic SU-HTB550GK Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

TABLE OF CONTENTS

1 Safety Precautions----------------------------------------------- 3
1.1. General Guidelines---------------------------------------- 3
1.2. Before Repair and Adjustment ------------------------- 4
1.3. Protection Circuitry ---------------------------------------- 4
1.4. Caution For Fuse Replacement------------------------ 4
1.5. Caution For SMPS Module------------------------------ 4
Home Theater Audio System
Model No.
Product Color: (K)...Black Type
PAGE
1.7. Safety Part Information -----------------------------------6
1.8. Safety Installation Instructions -------------------------7
2 Warning --------------------------------------------------------------8
2.1. Prevention of Electro Static Discharge (ESD)
3 Service Navigation --------------------------------------------- 10
© Panasonic Corporation 2012. All rights reserved.
Unauthorized copying and distribution is a violation of
law.
SU-HTB550GK
SU-HTB550GS
SU-HTB550GSX
SB-HTB550P
SB-HTB550GK
SB-HWA520GK
SB-HWA520GS
SB-HWA520GSX
SC-HTB550GK
SC-HTB550GS
SC-HTB550GSX
PSG1206002CE
PAGE

Advertisement

Table of Contents
loading

Related Manuals for Panasonic SU-HTB550GK

Summary of Contents for Panasonic SU-HTB550GK

  • Page 1: Table Of Contents

    2.2. Service caution based on Legal restrictions --------9 1.6. Caution for the AC Mains Lead (For GS only) ----- 5 3 Service Navigation --------------------------------------------- 10 © Panasonic Corporation 2012. All rights reserved. Unauthorized copying and distribution is a violation of law.
  • Page 2 3.1. Service Information -------------------------------------- 10 4 Specifications ---------------------------------------------------- 11 5 General/Introduction ------------------------------------------- 12 5.1. About VIERA Link ---------------------------------------- 12 5.2. Others (Licenses) ---------------------------------------- 13 6 Location of Controls and Components------------------ 14 6.1. Main Unit Key Button Operations -------------------- 14 6.2. Indicator illumination------------------------------------- 15 6.3.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, ensure that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

  • Page 4: Before Repair And Adjustment

    1.2. Before Repair and Adjustment Main Unit (SU-HTB550) Disconnect AC power, discharge AC Capacitors as such C5700, C5701, C5702, C5703 and C5705 through a 10W, 1W resistor to ground. Caution : DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices. After repairs are completed, restore power gradually using a variac, to avoid overcurrent.

  • Page 5: Caution For The Ac Mains Lead (For Gs Only)

    1.6. Caution for the AC Mains Lead (For GS only)

  • Page 6: Safety Part Information

    1.7. Safety Part Information Safety Parts List: There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards.

  • Page 7: Safety Installation Instructions

    1.8. Safety Installation Instructions...

  • Page 8: Warning

    2 Warning 2.1. Prevention of Electro Static Discharge (ESD) to Electrostatically Sensi- tive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by electricity. Such components commonly are called Electrostat- ically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semicon- ductor “chip”...

  • Page 9: Service Caution Based On Legal Restrictions

    2.2. Service caution based on Legal restrictions 2.2.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).

  • Page 10: Service Navigation

    3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.

  • Page 11: Specifications

    4 Specifications Dimensions (W x H x D) 956 mm x 78 mm x 55 mm Mass (Weight) 1.57 kg Horizontal placement (for wall mount) Dimensions (W x H x D) 956 mm x 75 mm x 35 mm Amplifier Section Mass (Weight) 1.54 kg RMS Output Power...

  • Page 12: General/Introduction

    5 General/Introduction 5.1. About VIERA Link...

  • Page 13: Others (Licenses)

    DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. HDAVI Control™ is a trademark of Panasonic Corporation.

  • Page 14: Location Of Controls And Components

    6 Location of Controls and Components 6.1. Main Unit Key Button Operations Main unit and active subwoofer (Front) Main unit Active subwoofer Standby/on switch ( AUX1 indicator Press to switch the unit from on to standby Lights amber when the device connected to the AUX1 terminal is the audio source mode or vice versa.

  • Page 15: Indicator Illumination

    6.2. Indicator illumination The indicators display the condition of this system by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Refer to “Troubleshooting” if the indicators do not light up as illustrated below. The indicators blink simultaneously.

  • Page 16: Remote Control Key Button Operations

    6.3. Remote Control Key Button Operations Remove the insulation sheet before using. DIALOG LEVEL To replace a button-type battery While pressing the stopper , pull out the battery holder. BD/DVD Turn the main unit on or off Set the button-type battery with its ( + ) mark Adjust the dialog effect level facing upward and then put the battery Adjust the output level of the active subwoofer...

  • Page 17: Installation Instructions

    Do not connect the AC mains lead until all other connections are complete. HDMI The HDMI connection supports VIERA Link “HDAVI Control” when used with a compatible Panasonic TV. Use the High Speed HDMI Cables. It is recommended that you use Panasonic’s HDMI cable.
  • Page 18 7.1.2. Connection with other devices You can direct the audio signal from the connected Blu-ray Disc player , DVD player, Set Top Box, etc. to this system. When the device has an HDMI terminal Preparation Connect the main unit to the TV. HDMI cable e.g., Blu-ray Disc player e.g., Video game console...
  • Page 19 7.1.3. Speaker cable connection Match the connector shape and connect to the terminals of the same color. Right speaker channel (R) SPEAKERS WHITE Left speaker channel (L) Main unit SPEAKERS DIGITAL AUDIO AC IN 7.1.4. AC mains lead connection Connect only after all other connections are complete. Active subwoofer AC IN AC IN...

  • Page 20: Service Mode

    8 Service Mode This unit is equipped with features of self-diagnostic & special mode setting for checking the functions & reliability. Special Note : Checking of the reliability (ageing) & operation must be carry out to ensure good working condition in unit. 8.1.
  • Page 21 8.1.2. Checking of Main Microprocessor Firmware version and Region Here are the procedures to check the region and main firmware version: Step 1 : Power up the main unit. Step 2 : Enter into service mode. (Refer to Section 8.1 for the procedures). Step 3 : Press [VOL+] on remote control one time to check for the main microprocessor firmware version no.
  • Page 22 8.1.3. Checking of Model Display and ROM Correction Information Here are the procedures to check the model display and ROM correction information: Step 1 : Power up the main unit. Step 2 : Enter into service mode. (Refer to Section 8.1 for the procedures). Step 3 : Press [VOL-] on remote control one time to check for the model display.

  • Page 23: Displayed Error Codes

    8.2. Displayed Error Codes This model does not have an alphanumetric display unit hence error code (when a fault condition occurs) is represented by the LED status indicators. Refer to Fig 8.2 Here is the description of the LED status indicators: LED 1 TV input selector indicator (OPTICAL INPUT 1 or ARC/HDMI OUT) LED 2 BD/DVD input selector indicator (HDMI INPUT 1) LED 3 AUX 1 input selector indicator (HDMI INPUT 2)

  • Page 24: Cold Start

    8.3. Cold start Here are the procedures to do a reset for the main unit. Step 1 : Power up the main unit. Step 2 : Press & hold [POWER] button on main unit for 4s or more. All LED will light-up and blink for 2 times (at frequency of 4Hz) 8.4.

  • Page 25: Troubleshooting Guide

    9 Troubleshooting Guide How to reset Factory setup condition The entering method of Doctor Mode (after turn off the power, you can exit from Dortor Mode) Turn on the power of main set. Setting main set in power on status. Press and hold the power button for 5 seconds.

  • Page 27: Service Fixture & Tools

    10 Service Fixture & Tools Prepare service tools before process service position. Ref. No. Service Tools Remarks SFT1 Main P.C.B. (CN2201) - DAMP P.C.B. (CN5200) RFKZHTB15 (40P FFC) SU-HTB550 SFT2 SPK - DAMP P.C.B. (CN1005) REXX1194 (2P Wire) SB-HWA520...

  • Page 28: Disassembly And Assembly Instructions

    11 Disassembly and Assembly Instructions Caution Note: • This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo- nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service manual) •...

  • Page 29: Disassembly Flow Chart

    11.1. Disassembly flow chart The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser- vicing. To assemble the unit, reverse the steps shown in the chart below. 11.1.1. Main Unit (SU-HTB550) 11.1.2.
  • Page 30 11.1.3. Active Subwoofer (SB-HWA520)

  • Page 31: Types Of Screws

    11.2. Types of Screws 11.2.1. Main Unit (SU-HTB550) 11.2.2. Front Speakers (SB-HTB550) 11.2.3. Active Subwoofer (SB-HWA520)

  • Page 32: Main Parts Location Diagram

    11.3. Main Parts Location Diagram 11.3.1. Main Unit (SU-HTB550) 11.3.2. Front Speakers (SB-HTB550) 11.3.2.1. Bar Position...
  • Page 33 11.3.2.2. Standing Position 11.3.3. Active Subwoofer (SB-HWA520)

  • Page 34: Main Unit (Su-Htb550)

    11.4. Main Unit (SU-HTB550) 11.4.1. Disassembly of Top Cabinet Step 1 : Remove 2 screws. Step 4 : Lift up the Top Cabinet to remove it as shown. Step 2 : Remove 3 screws. Caution: During assembling, ensure that the edge of Top Cabinet fully insert into the Front Panel Block.
  • Page 35 11.4.2. Disassembly of Main P.C.B. Step 2 : Detach 2P Cable Wire at the connector (CN2206) on Main P.C.B.. • Refer to “Disassembly of Top Cabinet”. Step 3 : Detach 40P FFC at the connector (CN2201) on Main P.C.B.. Step 1 : Remove 3 screws. Step 4 : Detach 17P FFC at the connector (CN2205) on Main P.C.B..
  • Page 36 Step 7 : Remove 2 screws. Caution: During assembling, ensure that the Main P.C.B. is seated properly on the locators. Step 8 : Slightly lift up and remove the Main P.C.B. as shown.
  • Page 37 11.4.3. Disassembly of SMPS P.C.B. Step 4 : Remove 4 screws. • Refer to “Disassembly of Top Cabinet”. Step 1 : Remove 1 screw. Step 2 : Detach 6P Cable Wire at the connector (CN5900) on DAMP P.C.B.. Step 3 : Detach 9P FFC at the connector (CN1) on SMPS P.C.B..
  • Page 38 11.4.4. Replacement of Switching Regula- Step 6 : Lift up and remove the SMPS P.C.B. as shown. tor IC (IC5701) • Refer to “Disassembly of SMPS P.C.B.”. 11.4.4.1. Disassembly of Switching Regu- lator IC (IC5701) Caution: Handle the SMPS P.C.B. with caution. Avoid touching the Heatsink Unit A due to it’s high temperature after prolonged use.
  • Page 39 11.4.4.2. Assembly of Switching Regulator Step 2 : Remove 1 screw. Step 3 : Remove the Switching Regulator IC (IC5701) from the IC (IC5701) Heatsink Unit A. Step 1 : Apply Grease on the Heatsink Unit A. Step 2 : Fix the Switching Regulator IC (IC5701) to the SMPS P.C.B..
  • Page 40 11.4.5. Replacement of Rectifier Diode Step 4 : Solder the pins of Switching Regulator IC(IC5701) on the solder side of SMPS P.C.B.. (D5802) • Refer to “Disassembly of SMPS P.C.B.”. 11.4.5.1. Disassembly of Rectifier Diode (D5802) Caution: Handle the SMPS P.C.B. with caution. Avoid touching the Heatsink Unit B due to it’s high temperature after prolonged use.
  • Page 41 11.4.5.2. Assembly Rectifier Diode 11.4.6. Disassembly of Rear Panel (D5802) • Refer to “Disassembly of Top Cabinet”. Step 1 : Remove 9 screws. Step 1 : Apply Grease on the Heatsink Unit B. Step 2 : Fix the Rectifier Diode (D5802) onto the SMPS P.C.B.. Caution: Ensure the pins of Rectifier Diode (D5802) is inserted and seated properly on the SMPS P.C.B..
  • Page 42 11.4.7. Disassembly of DAMP P.C.B. Caution: During assembling, ensure that the DAMP P.C.B. is seated properly on the locators. • Refer to “Disassembly of Top Cabinet”. • Refer to “Disassembly of Rear Panel”. Step 1 : Remove 2 screws. Step 2 : Detach 6P Cable Wire at the connector (CN5900) on DAMP P.C.B..
  • Page 43 11.4.8. Disassembly of Front Panel Block Step 5 : Release 3 catches. Caution: During assembling, ensure that the Front Panel • Refer to “Disassembly of Top Cabinet”. Block is properly inserted and fully catches onto the Bot- tom Chassis. Step 1 : Detach 2P Cable Wire at the connector (CN2206) on Main P.C.B..
  • Page 44 11.4.9. Disassembly of Wireless Adapter Step 7 : Remove the Front Panel Block as shown. P.C.B. and Digital Transmitter Mod- ule P.C.B. • Refer to “Disassembly of Top Cabinet”. • Refer to “Disassembly of Front Panel Block”. Step 1 : Remove 1 screw. Step 2 : Lift up the Digital Transmitter Holder Unit as shown.
  • Page 45 Caution 1 : During assembling, ensure that the Digital Step 7 : Remove the Wireless Adapter P.C.B. and the Digital Transmitter Holder Unit is fully inserted under the hook of Transmitter Module P.C.B. together as shown. the Front Panel Block. Caution 2 : During assembling, ensure that the Digital Transmitter Holder Unit is properly located in between the 2 ribs.
  • Page 46 11.4.10. Disassembly Power Button Step 8 : Remove the Digital Transmitter Module P.C.B. as shown. P.C.B. • Refer to “Disassembly of Top Cabinet”. • Refer to “Disassembly of Front Panel Block”. Step 1 : Remove 1 screw. Step 2 : Remove the Stopper P.C.B. through the 2P Cable Wire as shown.
  • Page 47 11.4.11. Disassembly of Button P.C.B. and Step 3 : Remove the Power Button P.C.B. as shown. Panel P.C.B. • Refer to “Disassembly of Top Cabinet”. • Refer to “Disassembly of Front Panel Block”. Step 1 : Remove 2 screws. Caution: During assembling, ensure that the Power Button P.C.B.
  • Page 48 Caution: During assembling, ensure that the Volume But- Step 4 : Lift up to release the Button P.C.B. from the slots of the ton Bracket is properly inserted into the hole of the Front Front Panel Block. Panel Block. Caution: During assembling, ensure that the Button P.C.B. is properly inserted into the slots of the Front Panel Block.
  • Page 49 Caution: During assembling, ensure that the Volume But- ton is properly located in between the 3 ribs of the Front Panel Block. Step 6 : Remove 1 screw. Step 7 : Remove the Panel P.C.B. as shown. Caution: During assembling, ensure that the Panel P.C.B. is seated properly on the guides of the Front Panel Block.

  • Page 50: Front Speakers (Sb-Htb550)

    11.5. Front Speakers (SB-HTB550) 11.5.1. Disassembly of Front Speaker Unit (L/R) (Bar position) • Front Speaker Unit with Stand Step 1 : Remove 2 screws. Step 2 : Remove 2 Stands. • Front Speaker Unit with Support Leg Step 1 : Remove 2 screws. Step 2 : Remove 2 Support Legs.
  • Page 51 Step 3 : Release the Speaker Wires from the grooves. Step 4 : Remove 4 screws. Step 5 : Detach the Front Speaker Unit (L) & (R) as arrow shown.
  • Page 52 11.5.2. Disassembly of Front Speaker Unit (L/R) (Standing position) Note : Front Speaker Unit (L) and (R) have the same mechanical structure. The same disassembly procedure can be applied for the both of them. Front Speaker Unit (L) is illustrated here. Step 1 : Push and release the White (+) and Blue (-) Speaker wires from Terminal.
  • Page 53 Step 5 : Remove the Speaker Base. Step 6 : Remove 2 screws. Step 7 : Push up and remove the Front Ornament Assembly.
  • Page 54 11.5.3. Disassembly of Rear Cabinet Assembly Notes : Front Speaker Unit (L) and (R) have the same mechanical structure. The same disassembly procedure can be applied for the both of them. Front Speaker Unit (L) is illustrated here. • Refer to “Disassembly of Front Speaker Unit (L/R)”. Step 1 : Remove 12 screws.
  • Page 55 Step 4 : Slightly lift up the Front Cabinet Block as arrow shown. Step 5 : Upset the Front Cabinet Block and place by the side of the Rear Cabinet Assembly. Step 6 : Detach the Red(+) and Black(-) wires. Step 7 : Remove the Sound Absorber.
  • Page 56 Step 9 : Remove 1 screw. Step 10 : Slightly bend up the Terminal (+) and Terminal (-). Step 11 : Remove the Terminal as arrow shown.
  • Page 57 11.5.4. Disassembly of Tweeter Speaker (SP1) Notes : Front Speaker Unit (L) and (R) have the same mechanical structure. The same disassembly procedure can be applied for the both of them. Front Speaker Unit (L) is illustrated here. • Refer to “Disassembly of Front Speaker Unit (L/R)”. •...
  • Page 58 Step 3 : Remove 4 screws. Step 4 : Remove the Tweeter Speaker (SP1) and Eva Packing. Caution: During assembling, ensure that the Tweeter Speaker (SP1) and Eva Packing is properly seated on the 3 locators of the Front Cabinet Block.
  • Page 59 Caution: During assembling, ensure that the Speaker Wires are properly inserted between the 4 ribs of the Front Cabinet Block as shown.
  • Page 60 11.5.5. Disassembly of Woofer Speaker (SP2) Notes : Front Speaker Unit (L) and (R) have the same mechanical structure. The same disassembly procedure can be applied for the both of them. Front Speaker Unit (L) is illustrated here. • Refer to “Disassembly of Front Speaker Unit (L/R)”. •...
  • Page 61 Step 4 : Remove 4 screws. Step 5 : Remove the Woofer Speaker (SP2). Caution: During assembling, ensure that the Woofer Speaker (SP2) is properly seated on the 2 locators of the Front Cabi- net Block.
  • Page 62 Step 6 : Remove the EVA Packing. Caution 1 : During assembling, ensure that the EVA Packing is properly seated on the 4 locators of the Front Cabinet Block. Caution 2 : During assembling, ensure that the Speaker Wires are properly inserted between the 4 slots of the Woofer Speaker (SP2) and between the 3 ribs of the Front Cabinet Block as shown.
  • Page 63 11.5.6. Disassembly of Port Unit Notes : Front Speaker Unit (L) and (R) have the same mechanical structure. The same disassembly procedure can be applied for the both of them. Front Speaker Unit (L) is illustrated here. • Refer to “Disassembly of Front Speaker Unit (L/R)”. •...
  • Page 64 Step 3 : Remove the Port Unit. Caution: During assembling, ensure that the Port Unit is properly seated on the guide of the Front Cabinet Block. Step 4 : Remove the Cushion EVA Port.
  • Page 65 11.5.7. Replacement of the Speaker Wires Notes : Front Speaker Unit (L) and (R) have the same mechanical structure. The same disassembly procedure can be applied for the both of them. Front Speaker Unit (L) is illustrated here. 11.5.7.1. Disassembly of the Speaker Wires •...
  • Page 66 11.5.7.2. Assembly of the Speaker Wires Step 1 : Attach the Black (+) and Blue (-) wires to the terminal of Tweeter Speaker (SP1). Step 2 : Attach the Blue/Red (+) and Yellow/Black (-) wires to the terminal of Woofer Speaker (SP2).
  • Page 67 Step 3 : Attach the Red (+) and Black (-) wires to the terminal. Step 4 : Dressed the Speaker Wires between the 4 ribs of the Front Cabinet Block as shown.
  • Page 68 Step 5 : Dressed the Blue/Red (+) and Yellow/Black (-) wires between the 4 slots of the Woofer Speaker (SP2) as shown. Step 6 : Dressed the Blue/Red (+) wires between the ribs of the Front Cabinet Block as shown. Step 7 : Insert the Speaker Wire between the 2 ribs of the Front Cabinet Block as shown.
  • Page 69 11.5.8. Replacement of Speaker Connector Housing 11.5.8.1. Disassembly Step 2: Insert the (+) speaker wire into the (+) hole of the Speaker Connector Housing. Step 1: Use a paper clip push the Speaker Wire head until it Note: Push in the speaker wire until hear the “click” sound. hide inside the Speaker Connector Housing.

  • Page 70: Active Subwoofer (Sb-Hwa520)

    11.6. Active Subwoofer (SB-HWA520) 11.6.1. Disassembly of Rear Panel Block Step 1 : Remove 6 screws. Step 3 : Slightly lift out the Rear Panel Block as shown. Caution : Do not exert too much force as it may damage the wiring inside.
  • Page 71 11.6.2. Disassembly of DAMP P.C.B. Step 5 : Detach 2P Cable Wire of the connector (CN101) on the SMPS P.C.B.. • Refer to “Disassembly of Rear Panel Block”. Step 6 : Detach 2P Cable Wire of the connector (CN1005) on the DAMP P.C.B..
  • Page 72 11.6.3. Disassembly of Digital Receiver Step 4 : Remove the DAMP P.C.B. as shown. Module P.C.B. • Refer to “Disassembly of Rear Panel Block”. • Refer to “Disassembly of DAMP P.C.B.”. Step 1 : Release the P.C.B. Holders slightly outwards as arrows shown.
  • Page 73 11.6.4. Replacement of Digital Amplifier IC Step 2 : Desolder the pins of Digital Amplifier IC (IC5200) on the solder side of the DAMP P.C.B.. (IC5200) • Refer to “Disassembly of Rear Panel Block”. • Refer to “Disassembly of DAMP P.C.B.”. 11.6.4.1.
  • Page 74 11.6.4.2. Assembly of Digital Amplifier IC Step 5 : Solder pins of Digital Amplifier IC (IC5200). Caution: Ensure the pins of Digital Amplifier IC (IC5200) (IC5200) are properly seated on the DAMP P.C.B.. Step 1 : Apply Grease on the IC Insulator at the Heatsink. Step 2 : Fix the Digital Amplifier IC (IC5200) onto the DAMP P.C.B..
  • Page 75 11.6.5. Disassembly Power Button 11.6.6. Disassembly SMPS Module P.C.B. P.C.B. • Refer to “Disassembly of Rear Panel Block”. • Refer to “Disassembly of Rear Panel Block”. • Refer to “Disassembly of DAMP P.C.B.”. Step 1 : Detach 7P Cable Wire at the connector (CN201) on Step 1 : Remove 2 screws.
  • Page 76 11.6.7. Disassembly of Bottom Panel Step 3 : Remove the SMPS Module P.C.B. as arrow shown. Block Step 1 : Remove 4 screws. Step 2 : Remove the Bottom Panel Block as shown.
  • Page 77 11.6.8. Disassembly of AC Inlet P.C.B. Caution : During assembling, ensure the locators of the AC Inlet Unit are properly inserted into the guides as diagram • Refer to “Disassembly of Rear Panel Block”. shown. • Refer to “Disassembly of Bottom Panel”. Step 1 : Remove 2 screws.
  • Page 78 11.6.9. Disassembly of Woofer Speaker Caution : During assembling, ensure that the AC Inlet is properly inserted into the slots of AC Cover as diagram (SP61) shown. • Refer to “Disassembly of Bottom Panel”. Step 1 : Remove 4 screws. Step 2 : Lift up to remove Woofer Speaker (SP61).

  • Page 79: Service Position

    12 Service Position 12.1. Main Unit (SU-HTB550) Note: For description of the disassembly procedures, see the Section 11 12.1.1. Checking and Repairing of Main 12.1.2. Checking and Repairing of Main P.C.B. (Side A) P.C.B. (Side B) Step 1 : Remove Top Cabinet. Step 1 : Remove Top Cabinet.
  • Page 80 12.1.3. Checking and Repairing of SMPS Step 9 : Upset the Main P.C.B. as arrow shown. Step 10 : Place the Main P.C.B. on an Insulated Material. P.C.B. Step 11 : Main P.C.B. (B side) can be checked and repaired as Step 1 : Remove Top Cabinet.
  • Page 81 12.1.4. Checking and Repairing of DAMP Step 7 : Attach 6P Cable Wire at the connector (CN5900) on DAMP P.C.B.. P.C.B. (Side A) Step 8 : Attach 40P FFC at the connector (CN5200) on DAMP Step 1 : Remove Top Cabinet. P.C.B..
  • Page 82 12.1.5. Checking and Repairing of DAMP 12.1.6. Checking and Repairing of Panel P.C.B. (Side B) P.C.B. Step 1 : Remove Top Cabinet. Step 1 : Remove Top Cabinet. Step 2 : Remove Rear Panel. Step 2 : Remove Front Panel Block. Step 3 : Detach 40P FFC at the connector (CN5200) on DAMP Step 3 : Remove Button P.C.B.

  • Page 83: Active Subwoofer (Sb-Hwa520)

    12.2. Active Subwoofer (SB-HWA520) Note: For description of the disassembly procedures, see the Section 11 12.2.1. Checking and Repairing of DAMP P.C.B. Step 1 : Remove the AC Inlet P.C.B.. Step 10 : DAMP P.C.B. can be checked and repaired as dia- Step 2 : Remove the SPMS Module P.C.B..

  • Page 85: Overall Simplified Block

    13 Overall Simplified Block 13.1. Overall Control Diagram (BASEBAND) RF Transceiver RF P.A. Panasonic 5GHz Digital Receiver Module/Digital Transmitter Module Block Diagram 5GHz WL Digital LED, Button, OPTICAL OPTICAL Transmitter Module Remote Sensor Jack 1 Jack 2 Connector REG_3.3V HDMI_3.3V HDMI_1.8V...

  • Page 86: Power Supply Diagram

    13.2. Power Supply Diagram 28V/4A 2.35A Damp 40 mA IC5300 . 0 / 40 mA Pin= 4.05 W DC_DC Con Pd = 0.69 W ROHM Jitter IC2803 DC_DC Con Free IC5801 Analogy SW 170 mA IC5301 1019 mA 50 mA IC2104 Op-Amp Opt 1 &...

  • Page 87: Block Diagram

    DC DET S DET S DET S DET SYNC SYNC AC SYNC FROM/TO SD OUT SD OUT SD OUT POWER SUPPLY PCONT PCONT PCONT HDMI PCONT HDMI PCONT HDMI PCONT ECO PCONT ECO PCONT ECO PCONT SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) SYSTEM CONTROL BLOCK DIAGRAM...

  • Page 88: Hdmi Block Diagram

    TMDS CLK- 12 R1XC- 2Y4 3 SPDIF CEC 13 JK2601 STBY H HDMI AV IN STBY H (AUX1(HDMI2)) RX RST RX RST RESET 100 FROM/TO RX INT RX INT SYSTEM CONTROL INT 102 MUTEOUT MUTEOUT MUTEOUT 75 SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) HDMI BLOCK DIAGRAM...

  • Page 89: Audio Block Diagram

    VALID VALID VALID VALID CN2201 CN5200 CN2201 CN5200 DC DET DC DET CN2201 CN5200 DC DET DC DETECT DC DET PVCC CIRCUIT Q5802,Q5803 Q5804,Q5805 ECO LEVEL ECO LEVEL CN2201 CN5200 ECO LEVEL ECO LEVEL D5803 D5804 SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) AUDIO BLOCK DIAGRAM...

  • Page 90: Ic Terminal Chart

    EXT D4 EXT D5 EXT D6 EXT D7 EXT D8 EXT D9 EXT D10 DQ10 DQ10 EXT D11 DQ11 DQ11 EXT D12 DQ12 DQ12 EXT D13 DQ13 DQ13 EXT D14 DQ14 DQ14 EXT D15 DQ15 DQ15 SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) IC TERMINAL CHART...

  • Page 91: Power Supply (1/2) Block Diagram

    REG3.3V 34,35 PC5720 FEEDBACK CN2202 SD OUT SD OUT SD OUT SD OUT FROM FEEDBACK CN2202 SYSTEM CONTROL ECO CONT ECO CONT ECO PCONT ECO PCONT CIRCUIT IC5801 C0DAAYY00072 SHUNT REGULATOR Q5863 PRIMARY SECONDARY SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) POWER SUPPLY (1/2) BLOCK DIAGRAM...

  • Page 92: Power Supply (2/2) Block Diagram

    3.3V REG12V 1 VIN ADJ 4 PANEL P.C.B. REG5V REG3.3V REG3.3V 3.3V IC2902 C0CBCAG00015 +1.8V VOLTAGE D2903 REGULATOR TO POWER SUPPLY REG3.3V 1 IN REG1.8V REG1.8V BLOCK (1/2) OUT 3 1.8V REG3.3V 2 ON/OFF SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) POWER SUPPLY (2/2) BLOCK DIAGRAM...

  • Page 93: Audio & Power Supply Block Diagram

    CH2 R OUT CN1000 CH2 IN RCH SPEAKER BOOT2 15 CN1005 OUT2 14 SUBWOOFER CN1005 OUT1 10 CN1000 BOOT1 9 DIGITAL Q1004 SU-HTB550GK/GS/GSX FREQUENCY RECEIVER +5V POWER CIRCUIT SUPPLY Q1005 SWITCH CN1000 PCONT RF PCONT PCONT 23 MODE SWITCH Q1006...

  • Page 94: Wiring Connection Diagram

    1 ....40 1 ..9 1 ..6 2 ..8 CAUTION RISK OF ELECTRIC SHOCK AC VOLTAGE LINE. PLEASE DO NOT TOUCH THIS P.C.B SC-HTB550GK/GS/GSX (SU-HTB550GK/GS/GSX) WIRING CONNECTION DIAGRAM...

  • Page 95: Active Subwoofer (Sb-Hwa520)

    15.2. Active Subwoofer (SB-HWA520) TO SMPS MODULE P.C.B. TL10* TL20* AC IN 110V ~ 240V 50/60Hz...GS/GSX 220V 50Hz...GK P5701 AC INLET P.C.B. SOLDER SIDE 1 ..4 H1004* POWER BUTTON P.C.B. SOLDER SIDE 1 . . 4 CN1002 CN1000 DAMP P.C.B.

  • Page 97: Schematic Diagram

    16 Schematic Diagram 16.1. Schematic Diagram Notes • Voltage and signal line (All schematic diagrams may be modified at any time with : +B Signal Line the development of new technology) Notes: : -B Signal Line Main Unit (SU-HTB550) : HDMI/Optical/Bluetooth/Aux Audio Input S6001: POWER switch.

  • Page 99: Main Unit (Su-Htb550)

    HD: MAIN (HDMI) CIRCUIT: SCHEMATIC DIAGRAM - 1 ~ 4 CP: MAIN (CPU) CIRCUIT: SCHEMATIC DIAGRAM - 5 ~ 6 DP: MAIN (DSP) CIRCUIT: SCHEMATIC DIAGRAM - 7 ~ 8 R2517 C2510 Q2508 B1CFGD000002 SC-HTB550GK/GS/GSX CEC INTERFACE TO MAIN (HDMI) (SU-HTB550GK/GS/GSX) CIRCUIT (3/4) MAIN (HDMI) CIRCUIT...
  • Page 100 HD: MAIN (HDMI) CIRCUIT: SCHEMATIC DIAGRAM - 1 ~ 4 J0JHC0000078 CP: MAIN (CPU) CIRCUIT: SCHEMATIC DIAGRAM - 5 ~ 6 DP: MAIN (DSP) CIRCUIT: SCHEMATIC DIAGRAM - 7 ~ 8 LB2508 LB2509~LB2512 J0JHC0000078 J0JHC0000078 CEC_IO BK_3.3V SC-HTB550GK/GS/GSX TO MAIN (HDMI) (SU-HTB550GK/GS/GSX) CIRCUIT (4/4) MAIN (HDMI) CIRCUIT...
  • Page 101 CP: MAIN (CPU) CIRCUIT: SCHEMATIC DIAGRAM - 5 ~ 6 Q2602 R1X2- DP: MAIN (DSP) CIRCUIT: SCHEMATIC DIAGRAM - 7 ~ 8 Q2604 TMDS D2- D2 GND QR2601 IC2603 R1X2+ TMDS D2+ C3EBEY000042 QR2602 Q2602, Q2604 G3 G4 EEPROM B1CFGD000002 DDC INTERFACE SC-HTB550GK/GS/GSX (SU-HTB550GK/GS/GSX) MAIN (HDMI) CIRCUIT...
  • Page 102 CP: MAIN (CPU) CIRCUIT: SCHEMATIC DIAGRAM - 5 ~ 6 DP: MAIN (DSP) CIRCUIT: SCHEMATIC DIAGRAM - 7 ~ 8 C2633 1 MUTEOUT C2634 X2601 RX_INT R2643 R2645 SC-HTB550GK/GS/GSX RX_SCDT RX_RST (SU-HTB550GK/GS/GSX) R2648 C2631 R2644 C2630 LB2607 LB2607~LB2608 1.5K MAIN (HDMI) CIRCUIT J0JHC0000078 LB2608...
  • Page 103 N.C. N.C. S_DET N.C. HDMI_PCONT HD: MAIN (HDMI) CIRCUIT: SCHEMATIC DIAGRAM - 1 ~ 4 SC-HTB550GK/GS/GSX CP: MAIN (CPU) CIRCUIT: SCHEMATIC DIAGRAM - 5 ~ 6 (SU-HTB550GK/GS/GSX) DP: MAIN (DSP) CIRCUIT: SCHEMATIC DIAGRAM - 7 ~ 8 MAIN (CPU) CIRCUIT...
  • Page 104 DP: MAIN (DSP) CIRCUIT: SCHEMATIC DIAGRAM - 7 ~ 8 C2827 C2824 C2823 6.3V330 6.3V330 QR2801 6.3V330 HDMI_GND K213 ...GS/GSX K113 ...GS/GSX CL223 CL123 SC-HTB550GK/GS/GSX K214 ...GK K114 ...GK HD HDMI_1.8V CL224 CL124 (SU-HTB550GK/GS/GSX) MAIN (CPU) CIRCUIT NOTE: “ * ” REF IS FOR INDICATION ONLY...
  • Page 105 DIGITAL AUDIO INTERFACE RECEIVER CS_CODEC RESET_CODEC SC-HTB550GK/GS/GSX HD: MAIN (HDMI) CIRCUIT: SCHEMATIC DIAGRAM - 1 ~ 4 CP: MAIN (CPU) CIRCUIT: SCHEMATIC DIAGRAM - 5 ~ 6 (SU-HTB550GK/GS/GSX) DP: MAIN (DSP) CIRCUIT: SCHEMATIC DIAGRAM - 7 ~ 8 MAIN (DSP) CIRCUIT...
  • Page 106 DSP_SCLK DSP_LRCLK DSP_LRCLK DSP_MCLK DSP_MCLK SC-HTB550GK/GS/GSX HD: MAIN (HDMI) CIRCUIT: SCHEMATIC DIAGRAM - 1 ~ 4 CP: MAIN (CPU) CIRCUIT: SCHEMATIC DIAGRAM - 5 ~ 6 (SU-HTB550GK/GS/GSX) DP: MAIN (DSP) CIRCUIT: SCHEMATIC DIAGRAM - 7 ~ 8 MAIN (DSP) CIRCUIT...
  • Page 107 R5206 DAP_LRCKI DSP_LRCLK DSP_GND PCONT_INV DSP_MCLK R5365 DSP_GND REG12V REG12V REG12V REG12V DGND C5202 DGND 1000P RL5005* C5220 C5219 IC5204 IC5205 C0JBAB000837 C0JBAE000302 DUAL INVERTER OR GATE SC-HTB550GK/GS/GSX (SU-HTB550GK/GS/GSX) DAMP CIRCUIT NOTE: “ * ” REF IS FOR INDICATION ONLY...
  • Page 108 B1ADBL000010 C5802 DC_DET DC DETECT Q5802 Q5804 R5806 B1ABCF000011 B1ABCF000011 DC DETECT DC DETECT D5803 C5804 ECO_LEVEL DA2J10100L R5818 R5811 C5803 D5804 C5805 R5817 100K DA2J10100L 1000P SC-HTB550GK/GS/GSX (SU-HTB550GK/GS/GSX) DAMP CIRCUIT NOTE: “ * ” REF IS FOR INDICATION ONLY...
  • Page 109 MAIN (CPU) R3007 CIRCUIT (CN2205) R3006 IN SCHEMATIC R3005 DIAGRAM - 6 R3004 C3001 100P RF+5V R3003 RF+5V C3003 LB3014 RF_GND 6.3V220 J0JBC0000015 RF_GND WM_DET C3000 R3013 0.01 ET3000* SC-HTB550GK/GS/GSX (SU-HTB550GK/GS/GSX) PANEL / BUTTON / POWER BUTTON / WIRELESS ADAPTER CIRCUIT...
  • Page 110 SWITCH Q5761 R5728 ECO CONTROL R5869 R5819 R5805 C5760 C5761 B1ABCN000001 Q5864 C5819 OP-AMP R5817 B1ABGC000001 R5868 C5870 R5861 2.2K R5767 C5828 100K R5818 SWITCH 6.3V470 2.2K SC-HTB550GK/GS/GSX (SU-HTB550GK/GS/GSX) NOTE: “ * ” REF IS FOR INDICATION ONLY SMPS CIRCUIT...

  • Page 111: Active Subwoofer (Sb-Hwa520)

    16.3. Active Subwoofer (SB-HWA520) 16.3.1. DAMP CIRCUIT (1/2) SCHEMATIC DIAGRAM - 13 DAMP CIRCUIT : +B SIGNAL LINE : -B SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE R1000 CN1002 150K IDSET POWER BUTTON +5V_GND CIRCUIT (H1004*) POWER_SW IN SCHEMATIC MODE_SW MODE_SW DIAGRAM - 15 Z1000...
  • Page 112 16.3.2. DAMP CIRCUIT (2/2) SCHEMATIC DIAGRAM - 14 DAMP CIRCUIT : +B SIGNAL LINE : -B SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE IC5200 R1009 C1BA00000497 Q1004 4.7K POWER AMPLIFIER B1ADCE000012 +5V POWER SUPPLY R5204 R1007 1.5K 1.2K Q1005 B1GBCFJJ0051 PCONT SWITCH C1012 R1015...
  • Page 113 16.3.3. POWER BUTTON & AC INLET CIRCUIT SCHEMATIC DIAGRAM - 15 POWER BUTTON CIRCUIT AC INLET CIRCUIT S1000 H1004* I/D SET (RED) IDSET P5701 DAMP CIRCUIT TL10* +5V_GND (CN1002) AC IN POWER_SW 110V ~ 240V IN SCHEMATIC TO SMPS MODULE MODE_SW 50/60Hz...GS/GSX DIAGRAM - 13...

  • Page 114: Printed Circuit Board

    VA2511 LB2504 C2528 R2521 R2525 C2553 R2507 LB2506 R2504 R2512 C2509 R2526 C2506 VA2513 C2508 R2510 LB2502 LB2501 VA2510 IC2502 PbF 3519A-1 3519A-1 R2295 R2296 (SIDE A) SC-HTB550GK/GS/GSX (SU-HTB550GK/GS/GSX) NOTE: " * " REF IS FOR INDICATION ONLY MAIN P.C.B.
  • Page 115 L2805 L2801 L2803 L2802 CN2202 IC2501 C2531 C2804 HDMI AV OUT (TV (ARC)) LB2801 D2321 R2546 R2545 CN2201 C2526 RX2501 R2542 R2538 PbF 3519A-1 3519A-1 (SIDE B) SC-HTB550GK/GS/GSX (SU-HTB550GK/GS/GSX) NOTE: " * " REF IS FOR INDICATION ONLY MAIN P.C.B.
  • Page 116 C5372 R5358 R5359 R5363 C5371 LB5251 C5381 C5343 R5351 DIGITAL AUDIO IN (AUX2 (OPT2)) X5302 R5208 CN5200 C5202 RL5005* 3520B-1 3520B-1 3520B-1 3520B-1 (SIDE A) (SIDE B) SC-HTB550GK/GS/GSX NOTE: " * " REF IS FOR INDICATION ONLY (SU-HTB550GK/GS/GSX) DAMP P.C.B.
  • Page 117 R6007 (SELECTOR) (VOL DOWN) PbF 3558AB 3558AB JW6003 POWER BUTTON P.C.B. (REP4792CC...GK) (REP4792BC...GS/GSX) S6001 (POWER) JW6004 PbF 3558AC 3558AC SC-HTB550GK/GS/GSX (SU-HTB550GK/GS/GSX) NOTE: " * " REF IS FOR INDICATION ONLY PANEL / BUTTON / POWER BUTTON / WIRELESS ADAPTER P.C.B.
  • Page 118 PC5720 T3.15A 250V R5862 C5897 R5864 C5791 3521AA-2 3521AA-2 ZA1* (HEATSINK) D5812 QR5862 R5801 CAUTION RISK OF ELECTRIC SHOCK AC VOLTAGE LINE. PLEASE DO NOT TOUCH THIS P.C.B SC-HTB550GK/GS/GSX (SU-HTB550GK/GS/GSX) NOTE: " " REF IS FOR INDICATION ONLY SMPS P.C.B.

  • Page 119: Active Subwoofer (Sb-Hwa520)

    17.2. Active Subwoofer (SB-HWA520) 17.2.1. DAMP / POWER BUTTON / AC INLET P.C.B. DAMP P.C.B. (REP4806BA) IC3002 Q1004 R1000 R5204 W1026 Z1003 W1027 CN1002 C3205 W1003 R1008 K1051 ...GK/GS/GSX C3105 R1007 R3206 R3108 Q1007 C1000 Q1006 W1020 Z1000 C1010 R1034 C5221 Q1005 HEATSINK*...

  • Page 121: Appendix Information Of Schematic Diagram

    STANDBY IC2001 REF NO. MODE HDMI STANDBY REF NO. IC2001 MODE HDMI STANDBY IC2001 REF NO. MODE HDMI STANDBY IC2002 REF NO. MODE HDMI STANDBY IC2003 REF NO. MODE HDMI STANDBY REF NO. IC2003 MODE HDMI STANDBY SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) MAIN P.C.B.
  • Page 122 REF NO. MODE HDMI STANDBY IC2301 REF NO. MODE HDMI STANDBY IC2303 REF NO. MODE POWER ON STANDBY IC2401 REF NO. MODE POWER ON STANDBY IC2401 REF NO. MODE POWER ON STANDBY IC2501 REF NO. MODE HDMI STANDBY SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) MAIN P.C.B.
  • Page 123 POWER ON STANDBY IC2503 REF NO. MODE POWER ON STANDBY IC2601 REF NO. MODE POWER ON STANDBY IC2601 REF NO. MODE POWER ON STANDBY IC2601 REF NO. MODE POWER ON STANDBY IC2601 REF NO. MODE POWER ON STANDBY SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) MAIN P.C.B.
  • Page 124 REF NO. MODE POWER ON STANDBY IC2703 REF NO. MODE POWER ON STANDBY IC2801 REF NO. MODE POWER ON 20.5 STANDBY 20.5 IC2802 REF NO. MODE POWER ON STANDBY IC2803 REF NO. MODE POWER ON 12.0 STANDBY 12.0 SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) MAIN P.C.B.
  • Page 125 MODE HDMI STANDBY Q2705 Q2706 QR2601 QR2602 REF NO. MODE HDMI STANDBY REF NO. QR2701 QR2702 MODE HDMI STANDBY Q2605 Q2606 Q2701 REF NO. MODE POWER ON STANDBY Q2702 Q2703 Q2704 REF NO. MODE POWER ON STANDBY SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) MAIN P.C.B.
  • Page 126 18.1.1.6. MAIN P.C.B. (6/6) QR2301 QR2302 QR2303 QR2304 QR2305 REF NO. MODE POWER ON STANDBY QR2306 QR2312 QR2801 QR2804 REF NO. MODE POWER ON 13.5 STANDBY 13.5 SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) MAIN P.C.B.
  • Page 127 IC5301 REF NO. MODE POWER ON STANDBY IC5301 REF NO. MODE POWER ON STANDBY IC5301 REF NO. MODE POWER ON STANDBY IC5301 REF NO. MODE POWER ON STANDBY REF NO. IC5801 MODE POWER ON 20.5 STANDBY 20.5 SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) DAMP P.C.B.
  • Page 128 POWER ON 20.5 19.1 21.2 19.6 21.2 21.2 19.1 21.2 STANDBY 20.5 19.1 21.2 19.6 21.2 21.2 19.1 21.2 SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) DAMP P.C.B. 18.1.1.9. PANEL P.C.B. IC6001 REF NO. MODE POWER ON STANDBY SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) PANEL P.C.B. 18.1.1.10. SMPS P.C.B. IC5701 REF NO.
  • Page 129 18.1.2. Active Subwoofer (SB-HWA520) 18.1.2.1. DAMP P.C.B. IC3002 REF NO. MODE HDMI -15.1 15.8 STANDBY -15.1 15.8 IC5200 REF NO. MODE HDMI 22.8 -22.7 -14.2 23.1 -22.9 -12.8 -22.9 23.1 -22.7 -22.7 22.8 STANDBY 22.8 -22.7 -14.2 23.1 -22.9 -12.8 -22.9 23.1 -22.7 -22.7 22.8 IC5200...
  • Page 130 18.1.3. Waveform Chart 18.1.3.1. Main Unit (SU-HTB550) 0.45Vp-p(20nsec/div) 5Vp-p(1usec/div) 4Vp-p(1usec/div) 6Vp-p(2usec/div) 6Vp-p(1usec/div) 1Vp-p(10usec/div) 2.5Vp-p(10usec/div) 3.5Vp-p(100nsec/div) 2.2Vp-p(100nsec/div) 8Vp-p(1usec/div) 3Vp-p(200nsec/div) 4Vp-p(1usec/div) 3Vp-p(500nsec/div) 5Vp-p(5usec/div) 5Vp-p(5usec/div) 5Vp-p(5usec/div) 5Vp-p(5usec/div) 5Vp-p(5usec/div) 5Vp-p(5usec/div) 5Vp-p(5usec/div) SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX)
  • Page 131 1.5Vp-p(5usec/div) 0.04Vp-p(5usec/div) 0.024Vp-p(5usec/div) 3Vp-p(10usec/div) 5Vp-p(2usec/div) 5Vp-p(2usec/div) 5Vp-p(2usec/div) 5Vp-p(500nsec/div) 5Vp-p(5usec/div) 5Vp-p(5usec/div) 4Vp-p(1usec/div) 4.2Vp-p(500nsec/div) 6Vp-p(5usec/div) 6Vp-p(5usec/div) 6Vp-p(5usec/div) 6Vp-p(5usec/div) 6Vp-p(5usec/div) 6Vp-p(5usec/div) 0.06Vp-p(5usec/div) 6Vp-p(10usec/div) SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX)
  • Page 132 6Vp-p(5usec/div) 6Vp-p(2usec/div) 6Vp-p(2usec/div) 6Vp-p(500nsec/div) 6Vp-p(5usec/div) 6Vp-p(5usec/div) 8Vp-p(500nsec/div) 4Vp-p(1usec/div) 7Vp-p(500nsec/div) 3.2Vp-p(1usec/div) 6Vp-p(1usec/div) 28Vp-p(1usec/div) 1.25Vp-p(20nsec/div) 4.4Vp-p(20nsec/div) 6.4Vp-p(1usec/div) 6Vp-p(1usec/div) SC-HTB550GK/GS/GSX(SU-HTB550GK/GS/GSX) 18.1.3.2. Active Subwoofer (SB-HWA520) 0.84Vp-p(200usec/div) 5.6Vp-p(1usec/div) 64Vp-p(1usec/div) 0.84Vp-p(200usec/div) SC-HTB550GK/GS/GSX(SB-HWA520GK/GS/GSX)

  • Page 133: Illustration Of Ic's, Transistors And Diodes

    18.2. Illustration of IC’s, Transistors and Diodes 18.2.1. Main Unit (SU-HTB550) C0JBAQ000073 (18P) C1AB00002975 (100P) C2HBCY000102 (128P) C1AB00003852 C1AB00002989 (144P) C0JBAZ001466 (20P) RFKWMHTB550P (100P) C1AB00003174 (28P) C1AB00003217 (44P) C3ABMY000029 (50P) No.1 No.1 C0CBCAG00015 C3EBEY000042 C0JBAE000302 C0EBY0000867 C0CBCDD00004 C0JBAB000837 C0DBEYY00146 C0JBAB000986 C0DBAYH00005 C0JBAR000396 C0DAAYY00064...

  • Page 134: Terminal Function Of Ic's

    18.3. Terminal Function of IC’s 18.3.1. IC2301 (RFKWMHTB550P) MICRO PROCESSOR IC Pin No. Mark Function RX1_WRT_SEL RX1 EDID ROM write enable select Pin No. Mark Function (Enable = High) FAN_DA No Connection DSP_CLIP PWM control AUX/BT No Connection STBY_H Audio output enable control (Enable REMOTE Remocon Serial Input = Low)
  • Page 135 Pin No. Mark Function W_SDO Wireless control (Serial Data Out) W_SCL Wireless control (Serial Clock)

  • Page 137: Exploded View And Replacement Parts List

    19 Exploded View and Replacement Parts List 19.1. Exploded View and Mechanical replacement Parts List 19.1.1. Cabinet Parts Location (SU-HTB550) *HEAT SINK UNIT A P5701 ZJ5701 *HEAT SINK UNIT B T5701 *DAMP HEAT SINK UNIT JK2601 ZJ5703 CN2301 JK2701 (WIRELESS CN3001 JK2501 (SMPS P.C.B.)
  • Page 138 19.1.2. Cabinet Parts Location (SB-HTB550) STANDING POSITION BAR POSITION (FRONT SPEAKER UNIT L/R) (FRONT SPEAKER UNIT (L/R)) A12-1 A12-1 A12-1 A12-1 A11-1 A12-1 A12-1 (FRONT SPEAKER UNIT (L)) A12-1 A12-1 (FRONT SPEAKER UNIT (R)) A11-1 A8-1 A8-1 A8-1 A8-1 A8-1 SB-HTB550GKK SB-HTB550P-K CABINET DRAWINGS...
  • Page 139 FRONT SPEAKER UNIT (L/R) REAR VIEW REAR VIEW SB-HTB550GKK SB-HTB550P-K CABINET DRAWINGS...
  • Page 140 19.1.3. Cabinet Parts Location (SB-HWA520) (POWER BUTTON P.C.B.) *H1004 (D-AMP P.C.B.) Z1000 CN1002 Z1003 CN1000 CN1005 CN1003 *H1001 Z1001 Z1002 (DIGITAL RECEIVER MODULE P.C.B.) P5701 (AC INLET P.C.B.) *TL20 SP61 *TL10 (SMPS MODULE) 75-2 75-2 75-2 75-2 75-2 SB-HWA520GK1 75-2 SB-HWA520GS1 NOTE: "...
  • Page 141 (2P FOR EUROPEAN) OI BOOK AC CORD AC CORD A10 SCREW (FOR GK ONLY) (FOR GS/GSX ONLY) (WALL HOOK) AC CORD (FOR GS/GSX ONLY) (2P FOR THAI) SU-HTB550GK/GS/GSX SB-HWA520GK1/GS1 A12 A12 A4-1 A5-1 SB-HTB550GK/P LEG SUPPORT UNIT A11-1 LEG FELT POLYFOAM (LEFT)
  • Page 143 19.1.5. Mechanical Replacement Parts List 19.1.5.1. Main Unit (SU-HTB550) Safety Ref. Part No. Part Name & QTY Remarks Description RMK0804 BOTTOM CHASSIS RMQ2001-1 TRANSMITTER HOLDER 1 Safety Ref. Part No. Part Name & QTY Remarks RMQ2003-1 VOLUME BUTTON Description BRACKET CABINET AND CHAS- RMZ1105-1 HEAT SINK SPACER...
  • Page 144 19.1.5.4. Packaging & Accessories Safety Ref. Part No. Part Name & QTY Remarks Description (SC-HTB550) RKM0666-K DOCKING FRONT RKS0491-K DOCKING REAR RML0754 DOCKING ARM Safety Ref. Part No. Part Name & QTY Remarks RMF0546 EPT SEALER Description RGK2305-K FRONT ORNAMENT PACKING MATERIALS RML0755-1 SUPPORT ARM...

  • Page 145: Electrical Replacement Parts List

    19.2. Electrical Replacement Parts List 19.2.1. Main Unit (SU-HTB550) Safety Ref. Part No. Part Name & QTY Remarks Description IC2301 RFKWMHTB550P IC IC2303 C3EBEY000042 IC Safety Ref. Part No. Part Name & QTY Remarks IC2401 C1AB00003174 IC Description IC2501 C1AB00002975 IC PRINTED CIRCUITS BOARDS IC2502 C0JBAB000986 IC...
  • Page 146 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description Q2701 B1HBCFA00003 TRANSISTOR D5760 DA2J10100L DIODE Q2702 B1CFGD000002 TRANSISTOR D5801 DA2J10100L DIODE Q2703 B1HBCFA00003 TRANSISTOR D5802 B0HBSM000054 DIODE Q2704 B1CFGD000002 TRANSISTOR D5802 DZ2J330M0L DIODE...
  • Page 147 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description L2801 G1C330MA0291 INDUCTOR LB2904 J0JHC0000078 INDUCTOR L2802 G1C330MA0291 INDUCTOR LB2905 J0JHC0000078 INDUCTOR L2803 G1C330MA0291 INDUCTOR LB2906 J0JCC0000396 INDUCTOR L2804 G1C330MA0291 INDUCTOR LB3001 J0JBC0000015 INDUCTOR L2805 G1C330M00028 INDUCTOR...
  • Page 148 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description LB2609 D0GAR00J0008 0 1/16W R2314 ERJ2GEJ151X 1/16W LB2610 D0GAR00J0008 0 1/16W R2315 ERJ2GEJ151X 1/16W LB2618 D0GBR00JA008 0 1/10W R2316 D0GA101JA023 100 1/16W ERJ3GEY0R00V 0 1/10W...
  • Page 149 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description R2418 D0GA101JA023 100 1/16W R2630 D0GA4R7JA023 4.7 1/16W R2419 D0GA101JA023 100 1/16W R2633 D0GB330JA008 33 1/10W R2420 D0GA473JA023 47K 1/16W R2634 D0GA470JA023 47 1/16W...
  • Page 150 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description R2861 D0GAR00J0008 0 1/16W R5702 ERJ1TYJ104U 100K R2862 D0GAR00J0008 0 1/16W R5703 ERJ1TYJ104U 100K R2915 D0GBR00JA008 0 1/10W R5710 ERJ8GEYJ105V 1M 1/4W R2918 ERJ3RBD561V...
  • Page 151 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description RX2004 D1H83304A024 RESISTOR NETWORK C2391 F1G1A1040006 0.1uF RX2005 D1H83304A024 RESISTOR NETWORK C2401 F1G1A1040006 0.1uF RX2006 D1H83304A024 RESISTOR NETWORK C2403 F1G1H101A565 100pF RX2007 D1H83304A024 RESISTOR NETWORK C2405 F1G1C1030007 0.01uF...
  • Page 152 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description C2620 F1G1H1020008 1000pF C5302 F1H1H104A913 0.1uF C2621 F1G0J105A031 1uF 6.3V C5303 F1H1H333A220 0.033uF 50V C2622 F1G1A1040006 0.1uF C5304 F1H1H333A220 0.033uF 50V C2623 F1G1A1040006 0.1uF C5307...
  • Page 153 19.2.2. Active Subwoofer (SB-HWA520) Safety Ref. Part No. Part Name & QTY Remarks Description C5805 F2A1V4710074 470uF C5806 ERJ3GEY0R00V 0 1/10W Safety Ref. Part No. Part Name & QTY Remarks C5807 ERJ3GEY0R00V 0 1/10W Description C5808 F2A1V4710074 470uF PRINTED CIRCUITS BOARDS C5814 F2A1A102A470 1000uF...
  • Page 154 Safety Ref. Part No. Part Name & QTY Remarks Safety Ref. Part No. Part Name & QTY Remarks Description Description W1003 ERJ3GEY0R00V 0 1/10W C1218 F1H1H104A013 0.1uF W1031 ERJ3GEY0R00V 0 1/10W C2000 F1H1H104A013 0.1uF W1052 ERJ3GEY0R00V 0 1/10W C2001 F2A1E101A205 100uF W1055 ERJ6GEY0R00V 0 1/8W...

This manual is also suitable for:

Su-htb550gsSu-htb550gsxSb-htb550pSb-htb550gkSb-hwa520gkSb-hwa520gs ... Show all

Table of Contents