Siemens iQ500 User Manual And Installation Instructions page 43

8.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
Do not touch the hot detergent
▶
solution.
To allow the detergent solution to
flow out into the container, remove
the sealing cap.
Firmly press on the sealing cap.
9.
Insert the drain hose into the
10.
holder.
Cleaning and servicing en
Cleaning the drain pump
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Requirement: "The drain pump is
empty." → Page 42
Since water may remain in the
1.
drain pump, remove the pump cap
carefully.
Clean the interior, the thread on
2.
the pump cap and the pump hous-
ing.
Make sure that the impeller in the
3.
drain pump can be rotated.
43