ABB Totalflow X Series Startup Manual page 16

Visual Alarm & Status Codes
After the unit completes recording of Log Period flow and operational
records, the LCD will show any alarm conditions that have occurred.
Also, the date, hour and type of alarm conditions are stored in the
device's memory. Status codes are also displayed when the conditions
exist. An alarm or status code can be a character, letter or symbol. The
alarm and status codes shown in Table 1 will appear on the right side of
the LCD screen; see illustration below. Descriptions of each code are
described in Table 1.
Figure 8 (Annunciator Locations)
Note: Applications in X Series devices can be assigned to any
annunciator. To verify the current assignments, see Annunciators under
Display in PCCU32's Entry Mode. (See Figure 9)
Figure 9 (Annunciator Assignments)
16