Philips Lumea SC1997 Manual page 17

Hide thumbs Also See for Lumea SC1997:
Table of Contents

Advertisement

18
English
2 Put the small plug in the deАice and put the adapter in the Бall socket.
3 SБitch on the deАice and select the right light intensitГ for Гour skin tone.
4 Place the deАice at a 90Х angle on the skin and press firmlГ so that the
attachment and the integrated safetГ sГstem are in contact Бith Гour
skin.
The integrated safetГ sГstem preАents unintentional flashingыБithout skin
contact.
5 Press the deАiceыfirmlГ onto Гour skin to ensureыproper skin contact. The
deАice then automaticallГ performs a skin tone analГsis and the readГ to
flash light lights up Бhite to indicate that Гou can proceed Бith the
treatment.
Note: When the readГ to flash light lights up orange, Гour skin is not
suitable for treatment. In this case, the deАice automaticallГ disables. You
can trГ to use the deАice on other areas Бith a lighter skin tone.
6 Press the flash button to release a flash.ыYou should feel a Бarm
sensation because of the flash.
Note: The light produced bГ the deАice is harmless to Гour eГes. It is not
necessarГ to Бear goggles during use. Use the deАice in a Бell-lit
roomыso that the light is less glaring to Гour eГes.
7 Place the deАice on the neВt area to be treated. After each flash, it takes
up to 3.5 seconds until the deАice is readГ to flash again. You can release
a flash Бhen the 'readГ to flash' light lights up again.
8 To make sure that Гou haАe treated all areas, release the flashes close to
each other. EffectiАe light onlГ comes out of the light eВit БindoБ,
therefore there should be some oАerlap.ыHoБeАer, make sure Гou flash
the same area onlГ once. Flashing the same area tБice doesn't improАe
the effectiАeness of the treatment, but increases the risk of skin reactions.
TIP: If Гou use Lumea on Гour bikini area and Бant to leaАe some hair in
place, make sure that the skin tone sensor is not placed on the remaining
hair during the treatment, as this can cause the deАice to block.
9 When Гou haАe finished the treatment, press and hold the on/off button
for 2 seconds to sБitch off the deАice.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumea sc1999

Table of Contents