Mitsubishi Electric CP-D70DW Service Manual page 10

BEFORE OPERATION
HANDLING OF PAPER / INK RIBBON SET
BEFORE PRINTING
• Fingerprints or dust on the paper printing surface may produce poor print quality and cause paper jams.
• When the print paper or ink ribbon is abruptly transferred from a cool place to a hot place, vapor or dew is generated
on the surface, which causes paper jams or degraded print quality. Leave the print paper in the room to stabilize its
temperature before use.
• If you repeat the PRINT PAPER INSTALLATION procedure more than the designated number of times, the indicated
number of prints may not be made. In addition, if you replace the print paper before it is used up, the indicated number of
prints may not be made.
AFTER PRINTING
• If the paper absorbs nonvolatile organic solvents (alcohol, ester, ketone, etc.) the print may be discolored.
• Discoloration of prints is accelerated if the print paper comes into contact with soft vinyl chloride such as transparent
tape.
• Avoid storing prints in direct sunlight or places with high humidity.
STORAGE OF PAPER / INK RIBBON SET
• Do not store the print paper and ink ribbon in the container made of soft polyvinyl chloride. They may be discolored
because of chemical reaction.
• Store the print paper and ink ribbon out of direct sunlight and away from heating appliances in a cool, dark place where
the temperature is 5˚C to 30˚C and the humidity is 20% to 60% RH.
BEFORE OPERATION
CONNECTION WITH USB DATA SIGNAL EQUIPMENT
CONNECTING TO PERSONAL COMPUTER (EXAMPLE)
Check that the printer is turned on before connecting procedure.
Turn on the power of a personal computer.
Connect the printer and a personal computer with a USB cable. (when the operation system
to be applied is other than Windows
Connect the printer to a personal computer as shown below.
For Windows ® 7 users, do not connect the printer to the computer.
Refer to the PRINTER DRIVER GUIDE in the CD-ROM for details.
To USB port
Personal computer
A USB cable is not supplied with this unit. Use the USB 2.0 certified cable of 2 m or less in length.
PRINTER DRIVER INSTALLATION
The printer driver is required to print the data from the personal computer connected with this unit.
The printer driver for Windows ® is supplied with this unit.
Product name Required operating system
CPD70X Applies for Microsoft Windows
CPD70V Applies for Windows Vista
Refer to the PRINTER DRIVER GUIDE in the CD-ROM for installing the printer driver.
Microsoft, Windows, Windows XP, Windows Vista and Windows 7 are the trademarks or the registered trademarks of
Microsoft Corporation in the U.S.A. and other countries.
Refer to the following website to check the latest version of the printer driver and the printer information.
http://www.MitsubishiElectric.co.jp/vcp/
15
® 7)
NOTE
To USB port
Digital color printer
NOTE
® XP operation system
and Windows 7 operation system
® ®
NOTE
16