Features And Functions - Mitsubishi Electric CP-D70DW Service Manual

FEATURES AND FUNCTIONS

FRONT PANEL
CP-D70DW
6
5
4
3
2
1
9
8
PAPER STRIP BIN
Holds the paper strips generated by margin cut. Empty
the bin frequently to prevent jamming the strips at the
print outlet.
NOTE
Remove the bin before opening the door. If the door
is opened with this bin attached, the printer or this
bin may be damaged. Do not remove the bin during
printing. It may cause a malfunction.
CONNECTOR COVER
Do not open the cover during normal use.
ALARM INDICATOR ( )
This indicator illuminates or blinks when a paper jam
occurs or the door is open. See page 17.
PAPER RIBBON INDICATOR ( )
When an error concerning the ink ribbon or print paper
occurs, this indicator illuminates or blinks. See page
17.
CP-D707DW
6
5
4
3
7 2
1
8
5
4
3
2
1
POWER INDICATOR ( )
When the power is turned on, the indicator illuminates.
It normally illuminates green, however, blinks or
illuminates orange depending on the printer status.
page 17.
PRINT OUTLET
The printed paper comes out here.
OPEN BUTTON ( )
Press to release the printing unit out.
PRINTING UNIT
Open to load print paper or ink ribbon. Press the
OPEN button to release the printing unit.
DOOR
Open the door to mount print paper.
OPENING THE DOOR
Pull out the printing unit by pressing the OPEN button
and then pull the knob to open the door.
Knob
Printing unit Door
FEATURES AND FUNCTIONS
PAPER STRIP BIN
Hook and pull up the paper strip bin to attach it firmly.
Hold and pull the handle on the lower part of paper strip
bin to remove.
1 2
7
8
6 CP-D70DW
5
7
4
8
3
2
1
See
POWER SWITCH
Use to switch the power ON and OFF.
POWER SOCKET (AC LINE)
Use to connect the provided power cord. Insert the
cord firmly.
FAN COVER /
HANDLE FOR TRANSPORTING
(CP-D70DW)
When carrying the printer, hold this handle and the
front upper part of the printer.
SECURING THE POWER CORD AND USB CABLE
1. Wrap a cable tie (supplied) around the power cord or the
USB cable.
2. Draw the tie through the securing hole on the rear panel
and secure it.
(Example)
7
PAPER TRAY
Engage the upper hooks of the tray on the protrusions
on the top of the margin cut box (1). Then, secure the
tray by engaging the lower hooks in the holes on both
sides of the box (2).
1 2
REAR PANEL
CP-D707DW
6
4
3
2
1
USB TERMINAL
Use to connect the USB cable.
See page 16.
SECURING HOLES FOR THE CABLE TIE
Use to secure the power cord or USB cable by using
the cable ties (supplied).
HANDLE FOR TRANSPORTING
(CP-D707DW)
When carrying the printer, hold this handle and the
front upper part of the printer.
Securing hole for the cable tie
5
8