Download Print this page
Sealey PP5 Quick Start Manual

Sealey PP5 Quick Start Manual

Integrated test light/voltmeter 3-48v

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instruction
Wear eye
manual
protection
1. SAFETY
WARNING! DO NOT use test light with domestic 110-230Volt supplies. Only use with DC Voltages between 3 and 48Volts.
Observe standard workshop safety procedures when using the meter.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting. Keep tools and other items away from the engine and
9
ensure you can see the working parts of the engine clearly.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.
9
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery. Contain or tie back long hair.
9
Ensure extension leads and probes are kept clear of hot surfaces and rotating parts.
9
DO NOT drape cables around neck or arms – danger of entanglement.
8
DO NOT disassemble meter.
8
DO NOT get test light wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT use the meter for any purpose other than for which it is designed.
8
DO NOT use the meter if damaged.
8
When not in use place test in its case and store in a safe, dry, childproof location.
9
2. INTRODUCTION
LCD meter draws minute currents making this tool safe to use around delicate electronic components. With a range of 3-48V DC, this tool is
suitable for motorcycle, car and commercial applications. Includes interchangeable 65 & 175mm probes, leads and clips with Ø4mm banana
coupling.
© Jack Sealey Limited
INTEGRATED TEST LIGHT/VOLTMETER 3-48V
PP5
MODEL NO:
Original Language Version
PP5 Issue: 1 - 29/11/18

Advertisement

loading

Summary of Contents for Sealey PP5

  • Page 1 INTEGRATED TEST LIGHT/VOLTMETER 3-48V MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...