System Operation; Lcd Panel; Monitoring Portal - GE GEP User Manual

4.4.4 Export Power Limit Connection Diagram
The methods of connecting the Power Limiting device CT is shown below.
For the detailed installation procedure of CT, please refer to Step 4 of 4.4.3.
white & Black Wire
CT
Black
Wire
L
Inverter
4.4.5 Earth Fault Alarm(Only for Australia and New Zealand)
In compliance with the section 13.9 of IEC62109-2, the GE P inverter is equipped with an
earth fault alarm. When earth fault occurs, the fault indicator at the front LED screen will light up. On
inverters with Wi-Fi communication, the system sends an email with the fault notification to the
customer. For inverters without Wi-Fi, the buzzer of the inverter will keep ringing for one minute and
ring again at 30-minute intervals until the fault is resolved. (This function is only available in Austra-
lia and New Zealand).

4.4.6 Monitoring Portal

Portal is an on-wire monitoring system. After completing the installation of commu-
nication connection, you can access portal.gesolarinverter.com or download the
'Power Sight' App by scanning the QR code to monitor your PV plant and device.
Please contact after-sales for further details.
15 15
N
Switch Board
Router

5 System Operation

5.1 LCD Panel

Green / green /green / red light respectively correspond to:
INDICATOR
Power Sight
STATUS EXPLANATION
ON = INVERTER POWER-ON
OFF = INVERTER POWER-OFF
ON = INVERTER IS FEEDING POWER
OFF = INVERTER IS NOT FEEDING POWER
SINGLE SLOW FLASH = SELF CHECK BEFORE GRID CONNECT
SINGLE FLASH = WILL CONNECT WITH GRID
ON = COMMUNICATION SUCCESS
BLINK 2 = ROUTER COMMUNICATION FAILURE
BLINK 4 = SERVER COMMUNICATION FAILURE
BLINK = RS485 CONNECTED
ON = FAULT OCCURRED
OFF = NO FAULT
16 16